6 open source boards using the STM32G473CBTx

Real designs built with the STM32G473CBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the STM32G473CBTx

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32G473CBTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
  • The PF0 pin has a crystal on 5 of 5 designs, most often 16 MHz (then 20 MHz).
  • The VREF+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
VBATpin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (9), 10 µF (1), 1 µF (1)
PC14pin 3Connected to: Not connected 60% · a signal 40%
PC15pin 4Connected to: Not connected 60% · a signal 40%
PF0pin 5Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (1), 20 MHz (1), 8 MHz (1)
  • Capacitor to GND on 80% · 10 pF (2), 20 pF (1), 18 pF (1)
PF1pin 6Connected to: Signal 100%
  • Capacitor to GND on 80% · 10 pF (2), 20 pF (1), 18 pF (1)
  • Crystal on 80% · 16 MHz (1), 8 MHz (1), 24 MHz (1)
PG10pin 7Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 60% · 100 nF (3)
PA1pin 9Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 1 kΩ (2)
PA2pin 10Connected to: Not connected 60% · a signal 40%
PA3pin 11Connected to: Not connected 60% · a signal 40%
PA4pin 12Connected to: Not connected 60% · a signal 40%
PA5pin 13Connected to: Signal 60% · not connected 40%
  • Series resistor on 60% · 100 kΩ (1), 1 kΩ (1), 330 kΩ (1)
  • Resistor to GND on 40% · 27 kΩ (1), 10 kΩ (1)
PA6pin 14Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 100 kΩ (1), 330 kΩ (1)
  • Resistor to GND on 40% · 27 kΩ (1), 10 kΩ (1)
PA7pin 15Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 100 Ω (1), 1 kΩ (1), 330 kΩ (1)
  • Resistor to GND on 40% · 3.3 kΩ (1), 10 kΩ (1)
PB0pin 16Connected to: Not connected 60% · a signal 40%
PB2pin 18Connected to: Not connected 80% · VBAT_REF 20%
VSSApin 19Connected to: GND 100%
VREF+pin 20Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (8), 1 µF (7), 10 nF (4)
  • Ferrite bead on 60%
VDDApin 21Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (8), 1 µF (7), 10 nF (4)
  • Ferrite bead on 60%
PB10pin 22Connected to: Not connected 80% · a signal 20%
VSSpin 23, 35, 47Connected to: GND 100%
VDDpin 24, 36, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (26), 1 µF (4), 4.7 µF (4)
  • Ferrite bead on 60%
PB14pin 28Connected to: Not connected 60% · a signal 40%
PA9pin 31Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 100 Ω (1)
PA10pin 32Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 100 Ω (1)
PB7pin 44Connected to: Signal 60% · not connected 40%
  • Pull-up to 3.3V on 40% · 5.1 kΩ (1), 4.7 kΩ (1)
PB8pin 45Connected to: Signal 100%
  • Series resistor on 60% · 10 kΩ (3)
  • Resistor to GND on 40% · 10 kΩ (1), 100 kΩ (1)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DeploymentBoardV2.0 by HelloItzAlex, Stomper by JoKhannn, Dboard pcb by nnalyd and Budgetcan g4-hw by dbstephan.

The STM32G473CBTx in open source designs

The gallery holds 6 open source boards using the STM32G473CBTx from 5 GitHub repositories; a typical one measures about 49.4 × 38.7 mm and carries around 78 components.

83% use four copper layers or more, and 33% carry an open source license.

The most starred is Dboard pcb by nnalyd.

Microcontrollers on boards using the STM32G473CBTx

What boards using the STM32G473CBTx are built for

STM32G473CBTx: common questions

Where can I find a STM32G473CBTx reference design?

Each of the 6 boards on this page is a real design using the STM32G473CBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G473CBTx VBAT pin?

The VBAT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the STM32G473CBTx.

How is the STM32G473CBTx PF0 pin connected?

The PF0 pin has a crystal on 5 of 5 designs, most often 16 MHz (then 20 MHz). Counted from the KiCad layouts of 5 open source designs using the STM32G473CBTx.

What decoupling capacitors do designs use on the STM32G473CBTx VREF+ pin?

The VREF+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32G473CBTx.

Which microcontrollers do boards using the STM32G473CBTx use?

Most are built on STM32 (6).

How big is a typical board using the STM32G473CBTx?

The median is 49.4 × 38.7 mm, and 17% are two-layer designs.

What is the most popular open source board using the STM32G473CBTx?

By GitHub stars, Dboard pcb by nnalyd, with 1 stars.

Can I simulate one of these boards using the STM32G473CBTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part