Traffic Light Interface Board
joe-skb7·traffic-light-pcb·iface/iface.kicad_pcb
About the Traffic Light Interface Board
Traffic Light Interface Board is an open source PCB design by joe-skb7, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 152.4 × 91.4 mm, with 150 components from 21 distinct parts.
Other key parts include the 74HC595, PC817 and FTDI232. By type, the board carries 63 resistors, 40 transistors, 22 ICs, 12 connectors, 7 capacitors and 3 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
Hardware files for traffic light model and interfacing board
Hardware files for traffic light model and interfacing board.
Corresponding software for controlling the interface board can be found at [1].
This repository consists of two KiCad projects:
1. Traffic light board (light/): - it has 5 red and 5 green LEDs on it 2. Interfacing board (iface/): - connect it to your PC (via USB cable) from one side - connect it to up to 10 traffic light boards (via phone cable) from other side

Main components on the Traffic Light Interface Board
Traffic Light Interface Board bill of materials (BOM)
150 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 20 | PC817 | DIP-4_W7.62mm | U3, U4, U5, U6, U7, U8, U9, U10 +12 |
| 1 | FTDI232 | FTDI232 | A1 |
| 40 | BC847 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +32 |
| 1 | Barrel_Jack_Switch | BarrelJack_CUI_PJ-102AH_Horizontal | J1 |
| 1 | Conn_01x16 | PinHeader_1x16_P2.54mm_Vertical | J2 |
| 10 | 4P4C | RJ9_KLS_12-123-4P | J3, J4, J5, J6, J7, J8, J9, J10 +2 |
| 1 | Polyfuse | Fuse_1812_4532Metric | F1 |
| 1 | SW_DPDT_x2 | SW_CW_GF-126-0305_DPDT | SW1 |
| 1 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | YELLOW | LED_D5.0mm | D2 |
| 1 | RED | LED_D5.0mm | D3 |
| 2 | 100uF/25V | CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 1 | 1nF/2kV | C_Disc_D6.0mm_W2.5mm_P5.00mm | C3 |
| 4 | 100nF | C_1206_3216Metric | C4, C5, C6, C7 |
| 1 | 1M | R_1206_3216Metric | R1 |
| 1 | 820R | R_1206_3216Metric | R2 |
| 1 | 330R | R_1206_3216Metric | R3 |
| 20 | 470R | R_1206_3216Metric | R4, R5, R10, R11, R16, R17, R22, R23 +12 |
| 20 | 10k | R_1206_3216Metric | R6, R7, R12, R13, R18, R19, R24, R25 +12 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 20 | 39R | R_1206_3216Metric | R8, R9, R14, R15, R20, R21, R26, R27 +12 |
Traffic Light Interface Board design files
The KiCad project lives in the joe-skb7/traffic-light-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutiface/iface.kicad_pcb
Traffic Light Interface Board: common questions
How big is the Traffic Light Interface Board?
The Traffic Light Interface Board measures 152.4 × 91.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Traffic Light Interface Board?
150 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Traffic Light Interface Board design files?
From the joe-skb7/traffic-light-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Traffic Light Interface Board design in my own project?
Yes, under the terms of its GPL-3.0 license, which joe-skb7 chose for the repository.
More boards in traffic-light-pcb
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389