Treiber
About the Treiber PCB
Treiber is an open source PCB design by Jonny999999, published on GitHub. It is a 2-layer board measuring 42.5 × 52.1 mm, with 19 components from 18 distinct parts.
Other key parts include the LM7818CT, SFH620A, TC429 and LEG-12. By type, the board carries 5 connectors, 5 resistors, 4 ICs, 4 capacitors and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
Firmware and pcb's for custom built electric kart
Firmware for Atmega-8 Microcontroller and kicad PCB-Files for a custom built electric kart. Note: The firmware and PCB files Version V1 were originally created in 2015, those have been added to this repository for archival purposes.
Note: make upload flashes the last compiled .elf file only -> also run make first for compiling and flashing the latest version.
Main components on the Treiber
Treiber bill of materials (BOM)
19 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7818CT | lm7805_lying | U1 |
| 1 | SFH620A | DIP-4__300_big | U2 |
| 1 | TC429 | DIP-8__300_big | U3 |
| 1 | LEG-12 | LEG-12 | U4 |
| 1 | Gate | M4_pad | P1 |
| 1 | Emmitter | M4_pad | P2 |
| 1 | notaus | MFKDSP-2 | P3 |
| 1 | signal | MFKDSP-2 | P4 |
| 1 | gnd | LeiterplattenKlemme2_5RM_1mmhole | P5 |
| 1 | DIODE | R10_big | D1 |
| 1 | 330nF | C_rund | C1 |
| 1 | 100nF | C_eckig | C2 |
| 1 | 10uF | C_eckig | C3 |
| 1 | 10uF | C_rund | C4 |
| 1 | R | R10_big | R1 |
| 1 | 4k7 | R10_big | R2 |
| 1 | 0 | R10_big | R3 |
| 2 | 400 | R10_big | R4, R5 |
Treiber design files
The KiCad project lives in the Jonny999999/electric-kart repository on GitHub; these links point at the commit this page was built from.
Treiber: common questions
How big is the Treiber PCB?
The Treiber measures 42.5 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Treiber?
19 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Treiber design files?
From the Jonny999999/electric-kart repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Treiber design in my own project?
The repository has no license, so all rights stay with Jonny999999. Use it as a reference, and ask the author before reusing the design.
More boards in electric-kart
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k