HardLabs

Control

Jonny999999·electric-kart·hardware/V1.x_control-board/control.kicad_pcb

Control PCB layout, top view — open source AVR/Arduino board by Jonny999999

About the Control PCB

Control is an open source AVR/Arduino PCB design by Jonny999999, published on GitHub. It is a 2-layer board measuring 82 × 124 mm, with 61 components from 25 distinct parts.

Its main chip is the ATMEGA8A-P, from the AVR/Arduino family. Other key parts include the 7812, 7805 and SFH620A. By type, the board carries 20 resistors, 13 diodes, 11 connectors, 8 capacitors, 6 ICs and 2 relays.

It belongs with the power & battery designs in this gallery.

From the project

Firmware and pcb's for custom built electric kart

Firmware for Atmega-8 Microcontroller and kicad PCB-Files for a custom built electric kart. Note: The firmware and PCB files Version V1 were originally created in 2015, those have been added to this repository for archival purposes.

Note: make upload flashes the last compiled .elf file only -> also run make first for compiling and flashing the latest version.

Control, from the project README
From the project README

Main components on the Control

ATMEGA8A-P78127805SFH620A

Control bill of materials (BOM)

61 components, 25 distinct parts.

QtyPartRefs
1
ATMEGA8A-P
IC1
1
7812
U1
1
7805
U2
3
SFH620A
U3, U4, U5
1
VAL**
m3_scheibe
1
POWER
P1
1
USART
P2
1
ISP
P3
1
I2C
P4
1
analog
P5
1
OUT
P6
1
24V
P7
1
GND
P8
1
PWM
P9
1
SPEED
P10
1
SWITCHES
P11
2
IRFZ24n
K1, K2
6
DIODE
D1, D2, D3, D4, D5, D6
2
LED
D8, D9
5
Z5.1V
D10, D11, D12, D13, D14
Show 5 more
QtyPartRefs
2
330nF
C1, C2
5
100nF
C3, C4, C5, C6, C7
1
10uF
C8
12
R
R1, R2, R3, R4, R5, R6, R7, R8 +4
8
300
R12, R13, R14, R15, R17, R18, R19, R20

Control design files

The KiCad project lives in the Jonny999999/electric-kart repository on GitHub; these links point at the commit this page was built from.

Control: common questions

What microcontroller does the Control use?

The Control is built around the ATMEGA8A-P, from the AVR/Arduino family.

How big is the Control PCB?

The Control measures 82 × 124 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Control?

61 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Control design files?

From the Jonny999999/electric-kart repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Control design in my own project?

The repository has no license, so all rights stay with Jonny999999. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Control without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in electric-kart

Similar boards