Power supply and io board
JordanAceto·micro_ox·circuit_boards/power_supply_and_io_board/kicad_7/power_supply_and_io_board.kicad_pcb
About the Power supply and io board
Power supply and io board is an open source PCB design by JordanAceto, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 203.2 × 76.2 mm, with 44 components from 20 distinct parts.
Other key parts include the TL072. By type, the board carries 16 connectors, 10 capacitors, 8 diodes, 3 test points, 2 ICs and 2 resistors.
It belongs with the power & battery and audio designs in this gallery.
From the project
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
Linear +/-12 volt DC power supply and input/output jacks
Main components on the Power supply and io board
Power supply and io board bill of materials (BOM)
44 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 LM317_TO-220 | TO-220-3_Horizontal_TabDown | U1 |
| 1 | TL072 LM337_TO220 | TO-220-3_Horizontal_TabDown | U2 |
| 1 | keystone_7792 | keystone_7792 | M1 |
| 6 | PJ302M | PJ302M | J1, J2, J3, J4, J5, J6 |
| 2 | CUI_SDF-50J | CUI_SDF-50J | J7, J8 |
| 1 | NRJ6HM-1 | Jack_6.35mm_Neutrik_NRJ6HM-1_Horizontal | J9 |
| 1 | VCO_EXT_CON | 12_pin_IDC_header | J10 |
| 1 | VCF_EXT_CON | 6_pin_IDC-Header | J11 |
| 1 | MOD_BOARD_EXT_CON | 16_pin_IDC_header | J12 |
| 3 | power_out | 10_pin_IDC-Header | J13, J14, J15 |
| 1 | Mini-Fit_Jr_5566 | Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | J16 |
| 2 | 100K 5k | Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 1 | V+ | TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 1 | V- | TestPoint_Keystone_5000-5004_Miniature | TP2 |
| 1 | GND | TestPoint_Bridge_Pitch7.62mm_Drill1.3mm | TP3 |
| 8 | 1N4002 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | 2200u | CP_Radial_D18.0mm_P7.50mm | C1, C2, C3, C4 |
| 4 | 100n | C_0805_2012Metric | C5, C6, C7, C8 |
| 2 | 10u | CP_Radial_D6.3mm_P2.50mm | C9, C10 |
| 2 | 240 | R_0805_2012Metric | R1, R2 |
Power supply and io board design files
The KiCad project lives in the JordanAceto/micro_ox repository on GitHub; these links point at the commit this page was built from.
Power supply and io board: common questions
How big is the Power supply and io board?
The Power supply and io board measures 203.2 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power supply and io board?
44 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power supply and io board design files?
From the JordanAceto/micro_ox repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power supply and io board design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which JordanAceto chose for the repository.
More boards in micro_ox
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k