MomiPlug
joshnishikawa·MomiPlug·KiCad/MOMI.kicad_pcb
About the MomiPlug PCB
MomiPlug is an open source PCB design by joshnishikawa, published on GitHub. It is a 2-layer board measuring 69.9 × 69.9 mm, with 53 components from 33 distinct parts.
Other key parts include the H11L1M and MAX1555EZK_T. By type, the board carries 20 resistors, 14 connectors, 8 diodes, 6 capacitors, 2 ICs and 2 switches.
It belongs with the audio designs in this gallery.
From the project
A few files written for one specific MIDI controller (mainly for reference).
Main components on the MomiPlug
MomiPlug bill of materials (BOM)
53 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | H11L1M | DIP-6_W7.62mm | U1 |
| 1 | MAX1555EZK_T | SOT-753 | U2 |
| 2 | Conn_02x04_Male | PinHeader_2x04_P2.54mm_Horizontal | J1, J3 |
| 1 | MIDI in | SDS-50J | J2 |
| 1 | MIDI out | SDS-50J | J4 |
| 1 | JST 1mm (I2C) | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | USB_A | USB_A_Stewart_SS-52100-001_Horizontal | J6 |
| 1 | Conn_01x04_Female | PinSocket_1x04_P2.54mm_Vertical | J7 |
| 2 | Conn_01x18_Female | PinSocket_1x18_P2.54mm_Vertical | J8, J9 |
| 1 | Expression Pedal | Headphone_Jack_6.35mm_RA49B14B | J10 |
| 1 | Conn_01x05_Male | PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | AudioJack4 | Jack_3.5mm_PJ320D_Horizontal | J12 |
| 1 | Dual Footswitch | Headphone_Jack_6.35mm_RA49B14B | J13 |
| 1 | Conn_01x03_Male | Pin_Header_Straight_1x03_Pitch2.54mm | J14 |
| 1 | Battery_Cell | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | SW_SPDT | SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | Encoder_Switch | Rotary_Encoder_Switched_PEC11R | SW2 |
| 1 | D | D_A-405_P2.54mm_Vertical_AnodeUp | D1 |
| 1 | Green LED | LED_D3.0mm | D2 |
| 3 | Red LED | LED_D3.0mm | D3, D4, D6 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Green LED | LED_0805_2012Metric | D5 |
| 1 | Blue LED | LED_D3.0mm | D7 |
| 1 | Red LED | LED_0805_2012Metric | D8 |
| 4 | 10UF 10uF | C_0805_2012Metric | C1, C3, C5, C6 |
| 2 | 1UF 1uF | C_0805_2012Metric | C2, C4 |
| 1 | 270 | R_0805_2012Metric | R1 |
| 3 | 220 | R_0805_2012Metric | R2, R3, R4 |
| 7 | 330 | R_0805_2012Metric | R5, R8, R9, R10, R11, R12, R17 |
| 2 | 4.7K 4.7k | R_0805_2012Metric | R6, R7 |
| 4 | 47K 47k | R_0805_2012Metric | R16, R21, R22, R23 |
| 1 | 100K 100k | R_0805_2012Metric | R18 |
| 1 | 2.2K 2.2k | R_0805_2012Metric | R19 |
| 1 | 10K 10k | R_0805_2012Metric | R20 |
MomiPlug design files
The KiCad project lives in the joshnishikawa/MomiPlug repository on GitHub; these links point at the commit this page was built from.
MomiPlug: common questions
How big is the MomiPlug PCB?
The MomiPlug measures 69.9 × 69.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MomiPlug?
53 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MomiPlug design files?
From the joshnishikawa/MomiPlug repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the MomiPlug design in my own project?
The repository has no license, so all rights stay with joshnishikawa. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687