Esp32 pms7003
jpcanepa·esp32_pms7003
About the Esp32 pms7003 PCB
Esp32 pms7003 is an open source ESP32 PCB design by jpcanepa, published on GitHub. It is a 2-layer board measuring 48 × 37 mm, with 29 components from 19 distinct parts.
Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AMS1117-3.3 and AMS1117-5.0. By type, the board carries 9 capacitors, 5 diodes, 5 resistors, 4 connectors, 3 ICs and 2 switches.
It belongs with the sensors designs in this gallery.
From the project
ESP32 Air Quality Meter
Main components on the Esp32 pms7003
Esp32 pms7003 bill of materials (BOM)
29 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U3 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | USB_B_Micro | USB_Mini-B_Wuerth_65100516121_Horizontal | J1 |
| 1 | BATT | PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Right | J2 |
| 1 | PMS7003 Connector | PinSocket_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right | J5 |
| 1 | RESET | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | BOOTSEL | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW2 |
| 4 | SS14 | D_SMA_Handsoldering | D1, D2, D3, D4 |
| 1 | GPIO10 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 3 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C8, C9 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 2 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C6 |
| 2 | 10u | CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C5, C7 |
| 4 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R5 |
| 1 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Esp32 pms7003 design files
The KiCad project lives in the jpcanepa/esp32_pms7003 repository on GitHub; these links point at the commit this page was built from.
- LayoutESP32.kicad_pcb
- SchematicESP32.kicad_sch
Esp32 pms7003: common questions
What microcontroller does the Esp32 pms7003 use?
The Esp32 pms7003 is built around the ESP32-C3-MINI-1, from the ESP32 family.
How big is the Esp32 pms7003 PCB?
The Esp32 pms7003 measures 48 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32 pms7003?
29 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32 pms7003 design files?
From the jpcanepa/esp32_pms7003 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32 pms7003 design in my own project?
The repository has no license, so all rights stay with jpcanepa. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32 pms7003 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k