Alarm-Clock
jpt1729·Alarm-Clock·PCB/clock.kicad_pcb
About the Alarm-Clock PCB
Alarm-Clock is an open source ESP32 PCB design by jpt1729, published on GitHub. It is a 2-layer board measuring 97.8 × 110 mm, with 23 components from 15 distinct parts.
Its main chip is the AMS1117-3.3, from the ESP32 family. By type, the board carries 7 connectors, 5 resistors, 2 ICs, 2 transistors, 2 buzzers and 2 switches.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
Custom built alarm clock. I was partly inspired by this https://busy.bar/. I also just wanted ot make a cool custom project and right now I only have an Alexa next to my bed so I can't actually see the current time, but with this it should both wake me up and it should tell me th
Custom built alarm clock. I was partly inspired by this https://busy.bar/. I also just wanted ot make a cool custom project and right now I only have an Alexa next to my bed so I can't actually see the current time, but with this it should both wake me up and it should tell me the time :)
What this basically is its an ESP32 controlled alarm clock that connects to Wifi has a 1.9" LCD display and a snooze bar. It serves as a clock and an alarm (as of now, but I want to program it a bit more in the future!)
Main components on the Alarm-Clock
Alarm-Clock bill of materials (BOM)
23 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 2 | 2N3904 | TO-92_HandSolder | Q1, Q2 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 2 | Conn_01x08 | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J2, J6 |
| 4 | Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J3, J4, J5, J8 |
| 2 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1, BZ2 |
| 1 | ~ | TZT_1.9in_TFT_ST7789 | LCD1 |
| 1 | Keyswitch | SW_KS33_1u | S1 |
| 1 | RotaryEncoder_Switch_MP | Encoder_EC11_MX | SW1 |
| 1 | VAL** | mouse-bite-5mm-slot | mouse-bite-5mm-slot |
| 1 | 0.1µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | 5.1kΩ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 1kΩ | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R4, R5 |
Alarm-Clock design files
The KiCad project lives in the jpt1729/Alarm-Clock repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/clock.kicad_pcb
- SchematicPCB/clock.kicad_sch
- BOMBOM.csv
Alarm-Clock: common questions
What microcontroller does the Alarm-Clock use?
The Alarm-Clock is built around the AMS1117-3.3, from the ESP32 family.
How big is the Alarm-Clock PCB?
The Alarm-Clock measures 97.8 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Alarm-Clock?
23 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Alarm-Clock design files?
From the jpt1729/Alarm-Clock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Alarm-Clock design in my own project?
The repository has no license, so all rights stay with jpt1729. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Alarm-Clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k