BareDrones-FC-V1
About the BareDrones-FC-V1 PCB
BareDrones-FC-V1 is an open source STM32 PCB design by jpwolfe9912, published on GitHub. It is a 6-layer board measuring 37.1 × 37.2 mm, with 127 components from 60 distinct parts.
Its main chip is the STM32F722RETX, from the STM32 family. Other key parts include the MPU-6000, BMP280, W25Q128JVS, MAX7456EUI+ and MP4560_QFN10. By type, the board carries 41 capacitors, 35 resistors, 18 connectors, 10 diodes, 9 ICs and 6 inductors.
Main components on the BareDrones-FC-V1
BareDrones-FC-V1 bill of materials (BOM)
127 components, 60 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F722RETX STM32F722RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | MPU-6000 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U3 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | MAX7456EUI+ | MAX7456 | U5 |
| 2 | MP4560_QFN10 | MP4560DQ | U6, U9 |
| 2 | LP2985-3.3 | SOT-23-5 | U7, U8 |
| 1 | BSS138 | SOT-23 | Q1 |
| 1 | CSTNE8M00G55Z000R0 | OSC_CSTNE8M00G55Z000R0 | Y1 |
| 1 | 27MHZ 27MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y2 |
| 7 | CONN_01X04 Conn_01x04 | Conn_1x4_SMT | J2, J3, J4, J5, J7, J8, J9 |
| 3 | CONN_01X03 Conn_01x03 | Conn_1x3_SMT | J6, J15, J16 |
| 1 | CONN_01X08 Conn_01x08 | JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J10 |
| 1 | CONN_01X06 Conn_01x06 | JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J11 |
| 1 | CONN_01X06 Conn_01x06 | Conn_DJI | J12 |
| 1 | CONN_01X08 Conn_01x08 | Conn_8Edge_SMT | J13 |
| 2 | CONN_01X02 Conn_01x02 | Conn_1x2_SMT | J14, J17 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | J18 |
| 1 | CONN_02X07_ODD_EVEN Conn_02x07_Odd_Even | PinHeader_2x07_P1.27mm_Vertical_SMD | J20 |
| 4 | MountingHole_Pad | M3_Mounting_Hole | H1, H2, H3, H4 |
Show 40 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 2 | BLUE | LED_0603_1608Metric | D1, D3 |
| 2 | RED | LED_0603_1608Metric | D2, D4 |
| 1 | YELLOW | LED_0603_1608Metric | D5 |
| 1 | GREEN | LED_0603_1608Metric | D6 |
| 1 | PURPLE | LED_0603_1608Metric | D7 |
| 2 | 90V, 2A | D_SOD-523 | D8, D11 |
| 1 | BAT54C | SOT-23 | D12 |
| 1 | 100@100MHz | L_0603_1608Metric | FB1 |
| 2 | 100 @ 100 Mhz | L_0603_1608Metric | FB2, FB3 |
| 1 | Arrow | Arrow | L2 |
| 1 | 15UH 15uH | SRN3015-4R7M | L3 |
| 1 | 12UH 12uH | SRN3015-4R7M | L4 |
| 18 | 0.1UF 0.1uF | C_0402_1005Metric | C1, C3, C5, C6, C7, C8, C11, C12 +10 |
| 3 | 4.7UF 4.7uF | C_0402_1005Metric | C2, C24, C36 |
| 3 | 2.2UF 2.2uF | C_0402_1005Metric | C4, C32, C35 |
| 3 | 1UF 1uF | C_0402_1005Metric | C9, C26, C33 |
| 3 | 10NF 10nF | C_0402_1005Metric | C10, C30, C34 |
| 1 | 2.2NF 2.2nF | C_0402_1005Metric | C13 |
| 2 | 10PF 10pF | C_0402_1005Metric | C17, C18 |
| 2 | 10UF 10uF | C_0402_1005Metric | C22, C23 |
| 2 | 390PF 390pF | C_0402_1005Metric | C28, C39 |
| 2 | 1PF 1pF | C_0402_1005Metric | C29, C40 |
| 2 | 22UF 22uF | C_0402_1005Metric | C31, C41 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R1, R2 |
| 2 | 22 | R_0402_1005Metric | R3, R4 |
| 4 | 10K 10k | R_0402_1005Metric | R5, R11, R12, R35 |
| 9 | 1k | R_0402_1005Metric | R6, R7, R13, R14, R15, R18, R23, R24 +1 |
| 2 | 2k | R_0402_1005Metric | R8, R29 |
| 2 | 3.7K 3.7k | R_0402_1005Metric | R9, R10 |
| 1 | 100 | R_0402_1005Metric | R16 |
| 1 | 233 | R_0402_1005Metric | R17 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R19, R20 |
| 2 | 75 | R_0402_1005Metric | R21, R26 |
| 1 | 589 | R_0402_1005Metric | R22 |
| 2 | 200K 200k | R_0402_1005Metric | R27, R31 |
| 1 | 165K 165k | R_0402_1005Metric | R28 |
| 2 | 20K 20k | R_0402_1005Metric | R30, R34 |
| 1 | 93.1K 93.1k | R_0402_1005Metric | R32 |
| 1 | 3.8K 3.8k | R_0402_1005Metric | R33 |
BareDrones-FC-V1 design files
The KiCad project lives in the jpwolfe9912/BareDrones-FC-V1 repository on GitHub; these links point at the commit this page was built from.
- LayoutBareDrones-FC-V1.kicad_pcb
- SchematicBareDrones-FC-V1.kicad_sch
- BOMproduction/bom.csv
BareDrones-FC-V1: common questions
What microcontroller does the BareDrones-FC-V1 use?
The BareDrones-FC-V1 is built around the STM32F722RETX, from the STM32 family.
How big is the BareDrones-FC-V1 PCB?
The BareDrones-FC-V1 measures 37.1 × 37.2 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the BareDrones-FC-V1?
127 components, from 60 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BareDrones-FC-V1 design files?
From the jpwolfe9912/BareDrones-FC-V1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BareDrones-FC-V1 design in my own project?
The repository has no license, so all rights stay with jpwolfe9912. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BareDrones-FC-V1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Type g
google
169 × 30 mm24 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Base
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type c
188 × 30 mm17 parts2LApache-2.02.9k