Printable
JRegi·MagicAlonso-LineFollower·pcb/main_Magic_BluePIll/printable_PCB/printable_PCB.kicad_pcb
About the Printable PCB
Printable is an open source PCB design by JRegi, published on GitHub under the MIT license. It is a 2-layer board measuring 89 × 113.2 mm, with 39 components from 27 distinct parts.
Other key parts include the BluePill_SWD_Breakout, AMS1117CD-3.3, HC05 and CN3905. By type, the board carries 15 resistors, 6 capacitors, 5 diodes, 4 ICs, 4 switches and 3 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.
MagicAlonso es un robot seguidor de líneas de alto rendimiento con tracción y succión brushless.

Main components on the Printable
Printable bill of materials (BOM)
39 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BluePill_SWD_Breakout | BluePill | U1 |
| 1 | AMS1117CD-3.3 | TO-252-3_TabPin2 | U2 |
| 1 | HC05 | HC05 | U3 |
| 1 | CN3905 | Mini360_step-down | U6 |
| 1 | IRLML2502 | SOT-23 | Q1 |
| 1 | MPU6050 | MPU6050_Module | J2 |
| 1 | ESC | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J5 |
| 1 | Sensors | JST_XH_S10B-XH-A_1x10_P2.50mm_Horizontal | J9 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Power_SW | SW_DPDT_SLIDE_THT | SW1 |
| 1 | PUSH_2 | SW_Push_Sw-3424p_Handsolder | SW2 |
| 1 | PUSH_3 | SW_Push_Sw-3424p_Handsolder | SW3 |
| 1 | PUSH_1 | SW_Push_Sw-3424p_Handsolder | SW4 |
| 1 | SS14 | D_SOD-123 | D1 |
| 1 | LED_RGB | LED_RGB_5050-6 | D2 |
| 3 | LED_BLUE | LED_0805_2012Metric | D3, D4, D6 |
| 2 | 100nF | C_0603_1608Metric | C1, C5 |
| 3 | 10uF | C_0805_2012Metric | C3, C6, C7 |
| 1 | 100nF | C_0805_2012Metric | C4 |
| 3 | 10k | R_0603_1608Metric | R1, R9, R13 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1k | R_0603_1608Metric | R2, R6, R7, R10, R11, R12 |
| 1 | 330k | R_0805_2012Metric | R3 |
| 1 | 100k | R_0805_2012Metric | R4 |
| 1 | 1k | R_0805_2012Metric | R5 |
| 1 | 330 | R_0805_2012Metric | R8 |
| 1 | 10k | R_0805_2012Metric | R14 |
| 1 | 20k | R_0805_2012Metric | R16 |
Printable design files
The KiCad project lives in the JRegi/MagicAlonso-LineFollower repository on GitHub; these links point at the commit this page was built from.
Printable: common questions
How big is the Printable PCB?
The Printable measures 89 × 113.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Printable?
39 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Printable design files?
From the JRegi/MagicAlonso-LineFollower repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Printable design in my own project?
Yes, under the terms of its MIT license, which JRegi chose for the repository.
More boards in MagicAlonso-LineFollower
ESP32
Main MagicAlonso
JRegi
12.7 × 14.2 mm77 parts2LMIT0ESP32
Main MagicAlonso rounded
JRegi
89 × 113.2 mm76 parts2LMIT0Sensors16 MagicAlonso
JRegi
140 × 28.5 mm62 parts2LMIT0Main Magic BluePIll
JRegi
89 × 113.2 mm39 parts2LMIT0ESP32
Main Magic simple printable
JRegi
113.2 × 95.4 mm38 parts2LMIT0ESP32
Main Magic simple
JRegi
95.4 × 113.2 mm38 parts2LMIT0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979