Main Magic simple printable
JRegi·MagicAlonso-LineFollower·pcb/ESP32_main_boards/main_Magic-simple/printable-pcb/main_Magic-simple_printable.kicad_pcb
About the Main Magic simple printable PCB
Main Magic simple printable is an open source ESP32 PCB design by JRegi, published on GitHub under the MIT license. It is a 2-layer board measuring 113.2 × 95.4 mm, with 38 components from 32 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the CN3903. By type, the board carries 8 connectors, 8 capacitors, 8 resistors, 5 diodes, 4 switches and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.
MagicAlonso es un robot seguidor de líneas de alto rendimiento con tracción y succión brushless.

Main components on the Main Magic simple printable
Main Magic simple printable bill of materials (BOM)
38 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32E | U1 |
| 1 | CN3903 | Mini360_step-down | U6 |
| 1 | PW | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | MPU6050 | MPU6050_Module | J2 |
| 1 | LiPo | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J4 |
| 1 | Sensors | JST_XH_S10B-XH-A_1x10_P2.50mm_Horizontal | J9 |
| 1 | ESC1 | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J10 |
| 1 | ESC2 | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J11 |
| 1 | ESC3 | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J12 |
| 1 | UART_Out | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J14 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | ESP_JP | R_1206_3216Metric | JP1 |
| 1 | LED_JP | R_1206_3216Metric | JP2 |
| 1 | Power_SW | SW_Push_2P2T_Toggle_CK_PVA2OAH5xxxxxxV2 | SW1 |
| 1 | EN_Push | SW_Push_SPST_NO_Alps_SKRK_Handsolder | SW2 |
| 1 | Boot_Push | SW_Push_SPST_NO_Alps_SKRK_Handsolder | SW3 |
| 1 | BUTTON_Push | SW_SPST_CK_RS282G05A3 | SW4 |
| 1 | SS14 | D_SMA | D1 |
| 2 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3 |
| 1 | LED_ON | LED_0805_2012Metric | D4 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_BLUE | LED_0805_2012Metric | D6 |
| 1 | 100uF | CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 22uF | C_0805_2012Metric | C3 |
| 3 | 100nF | C_0805_2012Metric | C4, C6, C24 |
| 1 | 1uF | C_0805_2012Metric | C7 |
| 1 | 100nF | C_0603_1608Metric | C8 |
| 1 | 470uF | CP_Radial_D8.0mm_P3.50mm | C28 |
| 3 | 330 | R_0805_2012Metric | R1, R4, R5 |
| 2 | 10k | R_0603_1608Metric | R2, R3 |
| 1 | 1k | R_0603_1608Metric | R6 |
| 1 | 4.7k | R_0603_1608Metric | R7 |
| 1 | 10k | R_0805_2012Metric | R9 |
Main Magic simple printable design files
The KiCad project lives in the JRegi/MagicAlonso-LineFollower repository on GitHub; these links point at the commit this page was built from.
Main Magic simple printable: common questions
What microcontroller does the Main Magic simple printable use?
The Main Magic simple printable is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Main Magic simple printable PCB?
The Main Magic simple printable measures 113.2 × 95.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Main Magic simple printable?
38 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Main Magic simple printable design files?
From the JRegi/MagicAlonso-LineFollower repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Main Magic simple printable design in my own project?
Yes, under the terms of its MIT license, which JRegi chose for the repository.
Can I test firmware for the Main Magic simple printable without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in MagicAlonso-LineFollower
ESP32
Main MagicAlonso
JRegi
12.7 × 14.2 mm77 parts2LMIT0ESP32
Main MagicAlonso rounded
JRegi
89 × 113.2 mm76 parts2LMIT0Sensors16 MagicAlonso
JRegi
140 × 28.5 mm62 parts2LMIT0Printable
JRegi
89 × 113.2 mm39 parts2LMIT0Main Magic BluePIll
JRegi
89 × 113.2 mm39 parts2LMIT0ESP32
Main Magic simple
JRegi
95.4 × 113.2 mm38 parts2LMIT0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k