Sensors16 MagicAlonso
JRegi·MagicAlonso-LineFollower·pcb/sensors16_MagicAlonso/sensors16_MagicAlonso.kicad_pcb
About the Sensors16 MagicAlonso PCB
Sensors16 MagicAlonso is an open source PCB design by JRegi, published on GitHub under the MIT license. It is a 2-layer board measuring 140 × 28.5 mm, with 62 components from 11 distinct parts.
Other key parts include the QRE1113GR. By type, the board carries 35 resistors, 16 ICs, 6 capacitors, 2 modules, 2 diodes and 1 connector.
It belongs with the robotics & motion designs in this gallery.
From the project
Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.
MagicAlonso es un robot seguidor de líneas de alto rendimiento con tracción y succión brushless.

Main components on the Sensors16 MagicAlonso
Sensors16 MagicAlonso bill of materials (BOM)
62 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | QRE1113GR | OnSemi_CASE100CY | U0, U1, U2, U3, U4, U5, U6, U7 +8 |
| 1 | CD74HC4067M | SOIC-24W_7.5x15.4mm_P1.27mm | M0 |
| 1 | CD74HC4067 | CD74HC4067_module | M1 |
| 1 | Sensors | JST_XH_S10B-XH-A_1x10_P2.50mm_Horizontal | J0 |
| 2 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D0, D1 |
| 4 | 100nF | C_0805_2012Metric | C0, C2, C3, C5 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 1 | 22uF | C_0805_2012Metric | C4 |
| 18 | 100 | R_0805_2012Metric | R0, R1, R2, R3, R8, R9, R10, R11 +10 |
| 16 | 20k | R_0805_2012Metric | R4, R5, R6, R7, R12, R13, R14, R15 +8 |
| 1 | 10k | R_0805_2012Metric | R21 |
Sensors16 MagicAlonso design files
The KiCad project lives in the JRegi/MagicAlonso-LineFollower repository on GitHub; these links point at the commit this page was built from.
Sensors16 MagicAlonso: common questions
How big is the Sensors16 MagicAlonso PCB?
The Sensors16 MagicAlonso measures 140 × 28.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensors16 MagicAlonso?
62 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensors16 MagicAlonso design files?
From the JRegi/MagicAlonso-LineFollower repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensors16 MagicAlonso design in my own project?
Yes, under the terms of its MIT license, which JRegi chose for the repository.
More boards in MagicAlonso-LineFollower
ESP32
Main MagicAlonso
JRegi
12.7 × 14.2 mm77 parts2LMIT0ESP32
Main MagicAlonso rounded
JRegi
89 × 113.2 mm76 parts2LMIT0Printable
JRegi
89 × 113.2 mm39 parts2LMIT0Main Magic BluePIll
JRegi
89 × 113.2 mm39 parts2LMIT0ESP32
Main Magic simple printable
JRegi
113.2 × 95.4 mm38 parts2LMIT0ESP32
Main Magic simple
JRegi
95.4 × 113.2 mm38 parts2LMIT0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979