H503-0.2
jrengdahl·H503·H503-0.2-jlcpcb/H503-0.2.kicad_pcb
About the H503-0.2 PCB
H503-0.2 is an open source STM32 PCB design by jrengdahl, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 50.8 × 20.3 mm, with 47 components from 18 distinct parts.
Its main chip is the STM32H503RBTX, from the STM32 family. Other key parts include the XC6206P332MR, W25Q128JVS and WE-TVS-82400102. By type, the board carries 14 test points, 12 capacitors, 6 connectors, 4 ICs, 4 resistors and 3 diodes.
It belongs with the sensors and usb & debug tools designs in this gallery.
From the project
Test firmware and OSHPark board for STM32H503RB, including USB VCP console. Working toward bare metal OpenMP.
This project includes a small OSHPark board for the new H503 microcontroller from ST MIcro, and firmware to run on the board. The firmware includes OpenMP support for this bare metal microcontroller.
The STM32H503 is a low-end microcontroller by ST Microelectronics: -- Cortex-M33 CPU -- 250 MHz -- 128K flash -- 32K RAM -- typical peripherals for a small micro, including USB Device. -- ETM trace port
Main components on the H503-0.2
H503-0.2 bill of materials (BOM)
47 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206P332MR | SOT-23-3 | U1 |
| 1 | STM32H503RBTX STM32H503RBTx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | WE-TVS-82400102 | SOT-23-6 | U4 |
| 1 | ECS-2520MV-080-CN | Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 4 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical__min | J1, J2, J5, J6 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P1.27mm_Vertical | J3 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194_Horizontal | J4 |
| 2 | SW_Push | SW_SPST_B3U-1000P | BOOT1, RESET1 |
| 14 | TestPoint | TestPoint_THTPad_D1.0mm_Drill0.5mm_min | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +6 |
| 1 | LED | LED_PLCC-2_3.4x3.0mm_KA | D1 |
| 2 | 1N5819WS | D_SOD-323 | D2, D3 |
| 1 | ~ | C_0603_1608Metric | FB1 |
| 8 | .1uf | C_0603_1608Metric | C1, C2, C7, C8, C9, C10, C13, C14 |
| 2 | 1UF 1uf | C_0805_2012Metric | C3, C4 |
| 2 | 2.2UF 2.2uf | C_0805_2012Metric | C11, C12 |
| 3 | 10K | R_0603_1608Metric | R1, R2, R3 |
| 1 | 150 | R_0603_1608Metric | R9 |
H503-0.2 design files
The KiCad project lives in the jrengdahl/H503 repository on GitHub; these links point at the commit this page was built from.
H503-0.2: common questions
What microcontroller does the H503-0.2 use?
The H503-0.2 is built around the STM32H503RBTX, from the STM32 family.
How big is the H503-0.2 PCB?
The H503-0.2 measures 50.8 × 20.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the H503-0.2?
47 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the H503-0.2 design files?
From the jrengdahl/H503 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the H503-0.2 design in my own project?
Yes, under the terms of its BSD-3-Clause license, which jrengdahl chose for the repository.
Can I test firmware for the H503-0.2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in H503
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k