H503-0.3

jrengdahl·H503·H503-0.3/H503-0.3.kicad_pcb

H503-0.3 PCB layout, top view — open source STM32 board by jrengdahl

About the H503-0.3 PCB

H503-0.3 is an open source STM32 PCB design by jrengdahl, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 50.8 × 20.3 mm, with 47 components from 18 distinct parts.

Its main chip is the STM32H503RBTX, from the STM32 family. Other key parts include the XC6206P332MR, W25Q128JVS and WE-TVS-82400102. By type, the board carries 14 test points, 12 capacitors, 6 connectors, 4 ICs, 4 resistors and 3 diodes.

It belongs with the sensors and usb & debug tools designs in this gallery.

From the project

Test firmware and OSHPark board for STM32H503RB, including USB VCP console. Working toward bare metal OpenMP.

This project includes a small OSHPark board for the new H503 microcontroller from ST MIcro, and firmware to run on the board. The firmware includes OpenMP support for this bare metal microcontroller.

The STM32H503 is a low-end microcontroller by ST Microelectronics: -- Cortex-M33 CPU -- 250 MHz -- 128K flash -- 32K RAM -- typical peripherals for a small micro, including USB Device. -- ETM trace port

Main components on the H503-0.3

H503-0.3 bill of materials (BOM)

47 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC6206P332MR
U1
1
STM32H503RBTX
STM32H503RBTx
U2
1
W25Q128JVS
U3
1
WE-TVS-82400102
U4
1
ECS-2520MV-080-CN
X1
4
CONN_01X06_PIN
Conn_01x06_Pin
J1, J2, J5, J6
1
CONN_02X10_ODD_EVEN
Conn_02x10_Odd_Even
J3
1
USB_B_Micro
J4
2
SW_Push
BOOT1, RESET1
14
TestPoint
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +6
1
LED
D1
2
1N5819WS
D2, D3
1
C1002
~
FB1
8
C14663
.1uf
C1, C2, C7, C8, C9, C10, C13, C14
2
1UF
1uf
C3, C4
2
2.2UF
2.2uf
C11, C12
3
10K
R1, R2, R3
1
150
R9

H503-0.3 design files

The KiCad project lives in the jrengdahl/H503 repository on GitHub; these links point at the commit this page was built from.

H503-0.3: common questions

What microcontroller does the H503-0.3 use?

The H503-0.3 is built around the STM32H503RBTX, from the STM32 family.

How big is the H503-0.3 PCB?

The H503-0.3 measures 50.8 × 20.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the H503-0.3?

47 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the H503-0.3 design files?

From the jrengdahl/H503 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the H503-0.3 design in my own project?

Yes, under the terms of its BSD-3-Clause license, which jrengdahl chose for the repository.

Can I test firmware for the H503-0.3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in H503

Similar boards