Power supply2
jrseti·dishy1pi·hardware/power_supply2/power_supply2/power_supply2.kicad_pcb
About the Power supply2 PCB
Power supply2 is an open source PCB design by jrseti, published on GitHub under the MIT license. It is a 4-layer board measuring 24.6 × 33.2 mm, with 21 components from 20 distinct parts.
Other key parts include the MP2322GQH-Z. By type, the board carries 9 capacitors, 3 diodes, 3 resistors, 1 IC, 1 connector and 1 fuse.
It belongs with the power & battery and rf & radio designs in this gallery.
From the project
Satellite dish motor control for Raspberry Pi, hardware and software
The buck chip is the MP2322 from Monolithic Power Systems. Link to datasheet: https://www.monolithicpower.com/en/documentview/productdocument/index/version/1/document_type/Datasheet/lang/en/sku/MP2322
Main components on the Power supply2
Power supply2 bill of materials (BOM)
21 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2322GQH-Z | QFN-8_L2.0-W1.5-P0.50-BL | U1 |
| 1 | KF2EDGR-2.54-4P | CONN-TH_4P-P2.54_KF2EDGR-2.54-4P | CN1 |
| 1 | DC-005-2.5A-2.0 | CONN-TH_DC-005-2.5A-2.0 | DC1 |
| 1 | 1812L110/33MR | F1812 | F1 |
| 1 | SS-12F49-G050 | SW-TH_SS-12F45-GXXX | SW1 |
| 1 | SS34 | SMA_L4.3-W2.6-LS5.2-RD | D1 |
| 1 | SMBJ18A | SMB_L4.6-W3.6-LS5.3-RD | D3 |
| 1 | SMBJ16A hongjiacheng | D_SMB | D5 |
| 1 | 4.7uH | IND-SMD_L3.0-W3.0-1 | L1 |
| 1 | 100nF YAGEO | C_0603 | C1 |
| 1 | 22uF Samsung Electro-Mechanics | C_0805 | C2 |
| 1 | 22pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C3 |
| 1 | 1uF Samsung Electro-Mechanics | C_0402 | C4 |
| 1 | 22pF Samsung Electro-Mechanics | C_0603 | C5 |
| 1 | 47uF | C1206 | C8 |
| 1 | 100nF | C0603 | C9 |
| 2 | 10uF Samsung Electro-Mechanics | C_0603 | C11, C111 |
| 1 | 1.62K | R0603 | R1 |
| 1 | 220Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R2 |
| 1 | 200kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R3 |
Power supply2 design files
The KiCad project lives in the jrseti/dishy1pi repository on GitHub; these links point at the commit this page was built from.
Power supply2: common questions
How big is the Power supply2 PCB?
The Power supply2 measures 24.6 × 33.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Power supply2?
21 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power supply2 design files?
From the jrseti/dishy1pi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power supply2 design in my own project?
Yes, under the terms of its MIT license, which jrseti chose for the repository.
More boards in dishy1pi
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k