Ktemata
jsoeterbroek·ktemata·docs/ktemata_r3_wiring.kicad_sch
About the Ktemata PCB
Ktemata is an open source ESP32 PCB design by jsoeterbroek, published on GitHub under the CC-BY-SA-4.0 license. It is a board, with 16 components from 16 distinct parts.
Its main chip is the FireBeetle 2 ESP32-UE, from the ESP32 family.
It belongs with the power & battery, displays & leds and iot & wireless designs in this gallery.
From the project
Ktemata — a rugged offline-library handheld (Pi 5, Touch Display 2, 2S 18650 UPS). Parametric OpenSCAD case; keeps Wikipedia, maps and Gutenberg when power and networking are gone.
A rugged offline-library handheld (Pi 5, Touch Display 2, 2S 18650 UPS). Parametric OpenSCAD case; keeps Wikipedia, maps and Gutenberg when power and networking are gone.
Ktemata (κτήματα) is Greek for "possessions, things owned" — the plural of ktema. Thucydides opens his History of the Peloponnesian War by calling his work κτῆμα ἐς ἀεί, "a possession for all time": written down not to win a prize for one hearing, but so that what happened stays available to whoever comes later. That is this device's job. When the grid, the network and the servers are gone, it still holds a library —…
Ktemata bill of materials (BOM)
16 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4x 21700 pack (4S) | J1 | |
| 1 | Foldable solar panel | J2 | |
| 1 | Hand crank generator | J3 | |
| 1 | Sealed USB-C port | J4 | |
| 1 | MPPT / charger | J5 | |
| 1 | Waveshare UPS HAT (E) | J6 | |
| 1 | Raspberry Pi 5 | J7 | |
| 1 | DFR0550-V2 5 inch DSI | J8 | |
| 1 | Seeed M.2 BASE + 1TB | J9 | |
| 1 | Phistone 2.4G dongle | J10 | |
| 1 | Panasonic ML-2020 | J11 | |
| 1 | FireBeetle 2 ESP32-UE | J12 | |
| 1 | 1.3 inch OLED 0x3C | J13 | |
| 1 | BME688 0x76/0x77 | J14 | |
| 1 | DS3231 RTC 0x68 | J15 | |
| 1 | PBS-33B status button | J17 |
Ktemata design files
The KiCad project lives in the jsoeterbroek/ktemata repository on GitHub; these links point at the commit this page was built from.
- Schematicdocs/ktemata_r3_wiring.kicad_sch
Ktemata: common questions
What microcontroller does the Ktemata use?
The Ktemata is built around the FireBeetle 2 ESP32-UE, from the ESP32 family.
How many components are on the Ktemata?
16 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ktemata design files?
From the jsoeterbroek/ktemata repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Ktemata design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jsoeterbroek chose for the repository.
Can I test firmware for the Ktemata without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k