HardLabs

Placa Principal

juampi30·Relay_Wifi·Proyecto/Kikad/Placa_Principal/Placa_Principal/Placa_Principal.kicad_pcb

Placa Principal PCB layout, top view — open source ESP32 board by juampi30

About the Placa Principal PCB

Placa Principal is an open source ESP32 PCB design by juampi30, published on GitHub. It is a 2-layer board measuring 46.4 × 87 mm, with 9 components from 6 distinct parts.

Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. By type, the board carries 6 connectors, 1 IC, 1 switch and 1 capacitor.

It belongs with the iot & wireless designs in this gallery.

From the project

Es la prueba de mi primer repositorio

El proyecto es una pagina web/aplicación que permita al usuario controlar sus dispositivos electrónicos desde su celular. Este consta de una placa la cual se le conectan los dispositivos, funcionando como un interruptor. De esta forma mediante wifi podes controlar tus aparatos desde la comodidad del celular.

Placa Principal, from the project README
From the project README

Main components on the Placa Principal

ESP32-DEVKITC-32D

Placa Principal bill of materials (BOM)

9 components, 6 distinct parts.

QtyPartRefs
1
ESP32-DEVKITC-32D
U1
4
Screw_Terminal_01x03
J1, J2, J3, J4
1
USB_C_Receptacle_PowerOnly_6P
J5
1
Screw_Terminal_01x07
J6
1
SW_DIP_x01
SW1
1
C
C1

Placa Principal design files

The KiCad project lives in the juampi30/Relay_Wifi repository on GitHub; these links point at the commit this page was built from.

Placa Principal: common questions

What microcontroller does the Placa Principal use?

The Placa Principal is built around the ESP32-DEVKITC-32D, from the ESP32 family.

How big is the Placa Principal PCB?

The Placa Principal measures 46.4 × 87 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Placa Principal?

9 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Placa Principal design files?

From the juampi30/Relay_Wifi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Placa Principal design in my own project?

The repository has no license, so all rights stay with juampi30. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Placa Principal without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Relay_Wifi

Similar boards