HardLabs

Sys incendios Tx

JuliansCastro·Sistema-proteccion-incendios·Diseño electrónico - PCB KiCad/sys_incendios_Tx/sys_incendios_Tx.kicad_pcb

Sys incendios Tx PCB layout, top view — open source RP2040/RP2350 board by JuliansCastro

About the Sys incendios Tx PCB

Sys incendios Tx is an open source RP2040/RP2350 PCB design by JuliansCastro, published on GitHub. It is a 2-layer board measuring 77.5 × 85.1 mm, with 11 components from 11 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the L7805 and RA-02_LORA_mod_V4.0. By type, the board carries 5 connectors, 3 ICs, 2 resistors and 1 diode.

It belongs with the rf & radio, iot & wireless and displays & leds designs in this gallery.

From the project

Sistema integral de monitoreo y protección contra incendios forestales utilizando tecnología IoT. El sistema emplea sensores distribuidos que se comunican mediante protocolo LoRa para detectar condiciones ambientales críticas (temperatura, humedad y presencia de llamas) y transmitir los datos a una estación central basada en Raspberry Pi Pico W que

Este proyecto desarrolla un sistema integral de monitoreo y protección contra incendios forestales utilizando tecnología IoT. El sistema emplea sensores distribuidos que se comunican mediante protocolo LoRa para detectar condiciones ambientales críticas (temperatura, humedad y presencia de llamas) y transmitir los datos a una estación central basada en Raspberry Pi Pico W que proporciona interfaz web para visualización en tiempo real.

Main components on the Sys incendios Tx

L7805PicoRA-02_LORA_mod_V4.0

Sys incendios Tx bill of materials (BOM)

11 components, 11 distinct parts.

QtyPartRefs
1
L7805
U1
1
Pico
U2
1
RA-02_LORA_mod_V4.0
U4
1
Conn_01x06_Socket
J1
1
Conn_01x15
J2
1
DHT11
J3
1
Conn_PIR
J4
1
Conn_01x11
J5
1
1N4148
D1
1
3.3k
R1
1
1.8k
R2

Sys incendios Tx design files

The KiCad project lives in the JuliansCastro/Sistema-proteccion-incendios repository on GitHub; these links point at the commit this page was built from.

Sys incendios Tx: common questions

What microcontroller does the Sys incendios Tx use?

The Sys incendios Tx is built around the Pico, from the RP2040/RP2350 family.

How big is the Sys incendios Tx PCB?

The Sys incendios Tx measures 77.5 × 85.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sys incendios Tx?

11 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sys incendios Tx design files?

From the JuliansCastro/Sistema-proteccion-incendios repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sys incendios Tx design in my own project?

The repository has no license, so all rights stay with JuliansCastro. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Sys incendios Tx without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Sistema-proteccion-incendios

Similar boards