Way-To-Silence

juthomas·Way-To-Silence·Way to silence/Way to silence.kicad_pcb

Way-To-Silence PCB layout, top view — open source ESP32 board by juthomas

About the Way-To-Silence PCB

Way-To-Silence is an open source ESP32 PCB design by juthomas, published on GitHub. It is a 2-layer board measuring 59.3 × 38.1 mm, with 63 components from 28 distinct parts.

Its main chip is the ESP32-WROOM-32-N16, from the ESP32 family. Other key parts include the SM5308, CP2102-GMR, MAX98357AETE+T, USB-TYPE-C-018 and AMS1117CD-3.3. By type, the board carries 20 resistors, 18 capacitors, 6 ICs, 6 diodes, 5 connectors and 3 switches.

It belongs with the audio, iot & wireless and power & battery designs in this gallery.

From the project

- Link to IBOM ## Components - I2S Amplifier Module MAX98357A € 0.7886

- Link to IBOM ## Components - I2S Amplifier Module MAX98357A € 0.7886

- BMS SM5308 € 0.2758 - USB C Connector $ 0.0479 - 3.3V Regulator € 0.0398

- Bornier 3.5mm € 0.1065 - 2.2uH Inductance € 0.7154 - 1uH Inductance € 0.7287 - Battery Switch € 0.8814 - Reset Button € 0.0448

- 4.7nF Capacitor € 0.0025 - 4.7uF Capacitor € 0.0095 - 10uF Capacitor € 0.0085 - 22uF Capacitor € 0.0085 - 100nF Capacitor € 0.0022 - 220pF Capacitor € 0.0055 - 0Ω Resistor € 0.0011 - 100mΩ Resistor € 0.0039 - 500mΩ Resistor € 0.0031 - 1Ω Resistor € 0.0009 - 1kΩ Resistor € 0.0006

Way-To-Silence, from the project README
From the project README

Main components on the Way-To-Silence

ESP32-WROOM-32-N16SM5308CP2102-GMRMAX98357AETE+TUSB-TYPE-C-018AMS1117CD-3.3

Way-To-Silence bill of materials (BOM)

63 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32-N16
U1
1
SM5308
U2
1
CP2102-GMR
U3
1
MAX98357AETE+T
U4
1
USB-TYPE-C-018
U5
1
AMS1117CD-3.3
U6
2
BC817
Q1, Q2
1
C5155564
SD Card Connector
J1
1
C784942
Amplificator_Terminal
J2
1
5V_TERMINAL
5V_Terminal
J3
1
C784942
Battery_Terminal
J4
1
CONN_01X04_PIN
Conn_01x04_Pin
J6
1
C319013
SW_SPDT
SW1
2
C455280
SW_SPST
SW2, SW3
6
LED
D1, D2, D3, D4, D5, D6
2
C394474
FerriteBead
FB1, FB2
1
2.2UH
L1
6
100NF
100nF
C1, C2, C3, C7, C18, C19
1
4.7UF
4.7uF
C4
2
220PF
220pF
C5, C6
Show 8 more
QtyPartRefs
7
10UF
10uF
C8, C9, C10, C12, C17, C20, C21
2
22UF
22uF
C11, C16
9
10K
R1, R2, R3, R4, R5, R9, R10, R17 +1
2
5.11K
R6, R7
2
1M
R8, R11
4
0
R12, R13, R14, R15
1
C25212
1R
R16
2
1K
R19, R20

Way-To-Silence design files

The KiCad project lives in the juthomas/Way-To-Silence repository on GitHub; these links point at the commit this page was built from.

Way-To-Silence: common questions

What microcontroller does the Way-To-Silence use?

The Way-To-Silence is built around the ESP32-WROOM-32-N16, from the ESP32 family.

How big is the Way-To-Silence PCB?

The Way-To-Silence measures 59.3 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Way-To-Silence?

63 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Way-To-Silence design files?

From the juthomas/Way-To-Silence repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Way-To-Silence design in my own project?

The repository has no license, so all rights stay with juthomas. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Way-To-Silence without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards