39 open source boards using the CP2102-GMR

Real designs built with the CP2102-GMR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

39 boardsClear filters|Most starred

How designs wire the CP2102-GMR

Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the CP2102-GMR connects to, and the resistors, capacitors and other passives placed on it.

  • The DCD pin is left unconnected on 32 of 32 designs.
  • The RI pin is left unconnected on 32 of 32 designs.
  • The DSR pin is left unconnected on 32 of 32 designs.
  • The CTS pin is left unconnected on 29 of 32 designs (a signal on 3).
DCDpin 1Connected to: Not connected 100%
RIpin 2Connected to: Not connected 100%
GNDpin 3, 29Connected to: GND 92%
VDDpin 6Connected to: Signal 53% · 3.3V 38%
  • Capacitor to GND on 69% · 100 nF (18), 4.7 µF (6), 10 µF (3)
REGINpin 7Connected to: 5V 88%
  • Decoupling capacitor on 69% · 100 nF (18), 1 µF (12), 10 µF (3)
VBUSpin 8Connected to: 5V 81% · a signal 19%
  • Decoupling capacitor on 53% · 100 nF (14), 1 µF (11), 10 µF (2)
RSTpin 9Connected to: Signal 69% · not connected 31%
  • Pull-up to 3.3V on 44% · 4.7 kΩ (8), 10 kΩ (3), 1 kΩ (2)
NCpin 10, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22Connected to: Not connected 100%
SUSPENDpin 11, 12Connected to: Not connected 84% · a signal 16%
CTSpin 23Connected to: Not connected 91%
RTSpin 24Connected to: Signal 56% · not connected 44%
  • Series resistor on 41% · 10 kΩ (10), 68 Ω (1), 1 kΩ (1)
DSRpin 27Connected to: Not connected 100%
DTRpin 28Connected to: Not connected 53% · a signal 47%
  • Series resistor on 41% · 10 kΩ (10), 68 Ω (1), 1 kΩ (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SmartSpin2k by doudar, H616 devboard by Kononenko-K, Canjay by atopile and Battery-Powered-STM32-Board-With-USB by mohamedboubaker.

The CP2102-GMR in open source designs

The gallery holds 39 open source boards using the CP2102-GMR from 33 GitHub repositories; a typical one measures about 93.1 × 70.5 mm and carries around 79 components.

53% use four copper layers or more, and 38% carry an open source license.

The most starred is SmartSpin2k Panelized by doudar.

Microcontrollers on boards using the CP2102-GMR

CP2102-GMR: common questions

Where can I find a CP2102-GMR reference design?

Each of the 39 boards on this page is a real design using the CP2102-GMR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CP2102-GMR DCD pin connected?

The DCD pin is left unconnected on 32 of 32 designs. Counted from the KiCad layouts of 32 open source designs using the CP2102-GMR.

How is the CP2102-GMR RI pin connected?

The RI pin is left unconnected on 32 of 32 designs. Counted from the KiCad layouts of 32 open source designs using the CP2102-GMR.

How is the CP2102-GMR DSR pin connected?

The DSR pin is left unconnected on 32 of 32 designs. Counted from the KiCad layouts of 32 open source designs using the CP2102-GMR.

What parts are used alongside the CP2102-GMR?

The ESP32-WROOM-32, LMS8117AMP-3.3_NOPB, SRV05-4, STM32H750VBTx and ESP32-WROOM-32D appear in the most repositories here.

Which microcontrollers do boards using the CP2102-GMR use?

Most are built on ESP32 (21), STM32 (6), Raspberry Pi (1) and RP2040/RP2350 (1).

How big is a typical board using the CP2102-GMR?

The median is 93.1 × 70.5 mm, and 47% are two-layer designs.

What is the most popular open source board using the CP2102-GMR?

By GitHub stars, SmartSpin2k Panelized by doudar, with 291 stars.

Can I simulate one of these boards using the CP2102-GMR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part