Vibraphone controller
jvanvalkenburgh·vibraphone-controller·VibraphonePCB/VibraphonePCB.kicad_pcb
About the Vibraphone controller PCB
Vibraphone controller is an open source ESP32 PCB design by jvanvalkenburgh, published on GitHub. It is a 2-layer board measuring 25.4 × 238 mm, with 33 components from 27 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. By type, the board carries 4 resistors, 1 IC and 1 module.
From the project
Drop-in replacement for Adams vibraphone board.
Drop-in replacement for Adams vibraphone board.
When students replaced the power cord on the High School's Adams vibraphone, they discovered that the motor control does not work. The sliding potentiometer and three-digit display have erratic effects. Replacing the control board from Adams is deemed to likely be economically impractical given the power cord cost more than $100.00.
Main components on the Vibraphone controller
Vibraphone controller bill of materials (BOM)
33 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U1 |
| 1 | Motor_DC | M1 | |
| 1 | LDT-M2806RI | DIPS762W45P254L2253H635Q12N | DD1 |
| 1 | 9.53 k | DR1 | |
| 1 | MAX7219CNG | DIP-24_W7.62mm | DU1 |
| 1 | ${SIM.PARAMS} | MC1 | |
| 1 | 10k | MR1 | |
| 1 | L293D | DIP-16_W7.62mm | MU1 |
| 1 | ~ | OPB1 | |
| 2 | 100uf | PC1, PC3 | |
| 1 | 470uF | PC2 | |
| 1 | 15SQ045 | PD1 | |
| 1 | Jack-DC | PDC1 | |
| 1 | 337uH | PL1 | |
| 1 | 1uh | PL2 | |
| 1 | 2.2 | PR1 | |
| 2 | 3.3 | PR2, PR3 | |
| 1 | .4 - 1R | PRSC1 | |
| 1 | 680pf | PTC1 | |
| 1 | 100pf | PTC2 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC34063API | DIP-8_W7.62mm | PU1 |
| 3 | LED | UD1, UD2, UD3 | |
| 1 | Horizontal_Push | USW1 | |
| 1 | ONOFF_Push | USW2 | |
| 1 | Vertical_Push | USW3 | |
| 3 | 40Ω | R1, R2, R3 | |
| 1 | 220Ω | R4 |
Vibraphone controller design files
The KiCad project lives in the jvanvalkenburgh/vibraphone-controller repository on GitHub; these links point at the commit this page was built from.
Vibraphone controller: common questions
What microcontroller does the Vibraphone controller use?
The Vibraphone controller is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the Vibraphone controller PCB?
The Vibraphone controller measures 25.4 × 238 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vibraphone controller?
33 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vibraphone controller design files?
From the jvanvalkenburgh/vibraphone-controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vibraphone controller design in my own project?
The repository has no license, so all rights stay with jvanvalkenburgh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Vibraphone controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k