HardLabs

CarteExtensionMidi

jvillemejane·MBED_Studio_Projects·Villou_MIDI_TO_DMX_vAnniv/doc/HardWare/_old/carteExtensionMIDI/carteExtensionMidi.kicad_pcb

CarteExtensionMidi PCB layout, top view — open source AVR/Arduino board by jvillemejane

About the CarteExtensionMidi PCB

CarteExtensionMidi is an open source AVR/Arduino PCB design by jvillemejane, published on GitHub. It is a 2-layer board measuring 59.1 × 74.3 mm, with 11 components from 9 distinct parts.

Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. Other key parts include the CNY17_1 and 4011. By type, the board carries 4 resistors, 3 connectors, 2 ICs, 1 module and 1 diode.

Main components on the CarteExtensionMidi

CNY17_14011Arduino_UNO_R3

CarteExtensionMidi bill of materials (BOM)

11 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CNY17_1
U1
1
4011
U2
1
Arduino_UNO_R3
A1
1
MIDI_IN
J1
1
MIDI_OUT
J2
1
Conn_02x04_Odd_Even
J8
1
1N4148
D1
3
220
R1, R3, R4
1
1.2k
R2

CarteExtensionMidi design files

The KiCad project lives in the jvillemejane/MBED_Studio_Projects repository on GitHub; these links point at the commit this page was built from.

CarteExtensionMidi: common questions

What microcontroller does the CarteExtensionMidi use?

The CarteExtensionMidi is built around the Arduino_UNO_R3, from the AVR/Arduino family.

How big is the CarteExtensionMidi PCB?

The CarteExtensionMidi measures 59.1 × 74.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CarteExtensionMidi?

11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CarteExtensionMidi design files?

From the jvillemejane/MBED_Studio_Projects repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the CarteExtensionMidi design in my own project?

The repository has no license, so all rights stay with jvillemejane. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CarteExtensionMidi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in MBED_Studio_Projects

Similar boards