SF4-Data-Logger
k12ish·SF4-Data-Logger·hardware/SF4-hardware/amplifiers.kicad_sch

About the SF4-Data-Logger PCB
SF4-Data-Logger is an open source PCB design by k12ish, published on GitHub. It is a board, with 48 components from 9 distinct parts.
Other key parts include the LM324. By type, the board carries 36 resistors, 6 capacitors, 3 ICs and 3 diodes.
It belongs with the audio designs in this gallery.
From the project
A Web Based ECG, built with Svelte, Arduino and KiCad
- No Installation Required: Simply plug and play on any machine with a web browser. - Cost-effective: The device costs less than £15. - Local Data Processing: All data is processed locally, ensuring regulatory compliance and enhanced privacy. - Three Measurement Modes: Provides enhanced diagnostic capabilities through multiple measurement modes. - Backed by NeuroKit2: Utilizes the well-established NeuroKit2 Python library for robust analysis. Plots BPM variation and the mean PQRST cardiac cycle. - High Sampling Frequency: Sampling frequency of 2.3kHz far exceeds the recommended 250 Hz for…
Main components on the SF4-Data-Logger
SF4-Data-Logger bill of materials (BOM)
48 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LM324 | U2, U3, U4 | |
| 3 | D_Zener | D1, D2, D3 | |
| 6 | 2.2n | C1, C2, C3, C4, C5, C6 | |
| 6 | 1k | R1, R2, R3, R4, R23, R24 | |
| 6 | 8.2k | R5, R6, R7, R8, R27, R28 | |
| 6 | 2.7k | R9, R10, R11, R12, R29, R30 | |
| 6 | 22k | R13, R14, R15, R16, R31, R32 | |
| 9 | 1M | R17, R18, R19, R20, R22, R26, R33, R34 +1 | |
| 3 | 470k | R21, R25, R35 |
SF4-Data-Logger design files
The KiCad project lives in the k12ish/SF4-Data-Logger repository on GitHub; these links point at the commit this page was built from.
SF4-Data-Logger: common questions
How many components are on the SF4-Data-Logger?
48 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the SF4-Data-Logger design files?
From the k12ish/SF4-Data-Logger repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the SF4-Data-Logger design in my own project?
The repository has no license, so all rights stay with k12ish. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687