HardLabs

IOT F26 PROJ

kaballian·IOT_F26_PROJ·IOT_AIR_FILTER_PROJ_REV_B/IOT_AIR_FILTER_PROJ.kicad_pcb

IOT F26 PROJ PCB layout, top view — open source PIC board by kaballian

About the IOT F26 PROJ PCB

IOT F26 PROJ is an open source PIC PCB design by kaballian, published on GitHub. It is a 4-layer board measuring 65 × 30 mm, with 60 components from 25 distinct parts.

Its main chip is the PIC16F18156T-I/SO, from the PIC family. Other key parts include the AMS1117-5.0, TXS0102DCT, MC14051BDR2G, INA180A2 and TLC59108xPW. By type, the board carries 17 capacitors, 15 resistors, 10 diodes, 9 ICs, 8 connectors and 1 crystal.

It belongs with the iot & wireless designs in this gallery.

Main components on the IOT F26 PROJ

AMS1117-5.0TXS0102DCTPIC16F18156T-I/SOMC14051BDR2GINA180A2TLC59108xPW

IOT F26 PROJ bill of materials (BOM)

60 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-5.0
U1
1
TXS0102DCT
U2
1
PIC16F18156T-I/SO
U3
1
MC14051BDR2G
U4
4
INA180A2
U5, U6, U7, U8
1
TLC59108xPW
U10
1
Crystal_GND24
Y1
1
Conn_01x02_Socket
J2
1
Conn_02x20_Odd_Even
J3
1
Conn_01x04_Pin
J5
4
Conn_01x04_Pin
J6, J7, J8, J9
1
Conn_01x05_Socket
J10
1
D_Zener
D1
9
LED
D2, D5, D6, D7, D8, D9, D10, D11 +1
2
47uF
C1, C5
1
10uF
C2
3
100nF
C3, C9, C17
9
10nF
C4, C8, C10, C11, C12, C13, C14, C15 +1
2
30pF
C6, C7
4
160m
R1, R3, R7, R8
Show 5 more
QtyPartRefs
1
20k
R2
1
10k
R4
1
432
R5
1
1k
R6
7
4.7k
R9, R10, R11, R12, R13, R14, R19

IOT F26 PROJ design files

The KiCad project lives in the kaballian/IOT_F26_PROJ repository on GitHub; these links point at the commit this page was built from.

IOT F26 PROJ: common questions

What microcontroller does the IOT F26 PROJ use?

The IOT F26 PROJ is built around the PIC16F18156T-I/SO, from the PIC family.

How big is the IOT F26 PROJ PCB?

The IOT F26 PROJ measures 65 × 30 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the IOT F26 PROJ?

60 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IOT F26 PROJ design files?

From the kaballian/IOT_F26_PROJ repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IOT F26 PROJ design in my own project?

The repository has no license, so all rights stay with kaballian. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IOT F26 PROJ without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards