Microscope
KabitaShahu·Circuit·microscope/microscope.kicad_pcb
About the Microscope PCB
Microscope is an open source PCB design by KabitaShahu, published on GitHub. It is a 2-layer board measuring 133 × 64.1 mm, with 43 components from 20 distinct parts.
Other key parts include the L7805. By type, the board carries 12 resistors, 10 connectors, 9 capacitors, 5 diodes, 2 ICs and 2 transistors.
Main components on the Microscope
Microscope bill of materials (BOM)
43 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | DIP-14_W7.62mm | U1 |
| 1 | L7805 | Voltage_Regulators | U2 |
| 2 | NMOS | TO-220-3_Vertical | Q1, Q2 |
| 1 | Crystal | Crystal | Y1 |
| 3 | Conn_01x02_Pin | bornier2 | J1, J2, J6 |
| 1 | Conn_01x04_Pin | new_5_jst_bournier | J5 |
| 1 | Conn_02x14_Counter_Clockwise | DIP-28 | J7 |
| 1 | Conn_02x09_Counter_Clockwise | DIP-18_W7.62mm_LongPads | J8 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J9 |
| 2 | Conn_01x05_Pin | new_5_jst_bournier | J10, J15 |
| 1 | Conn_01x06_Pin | BMS | J11 |
| 1 | R_Potentiometer | bornier2 | RV1 |
| 1 | SW_SPST | Push_Button | SW1 |
| 2 | 1N914 | Diode_Medium | D1, D2 |
| 3 | LED | bornier2 | D3, D4, D5 |
| 6 | C | Capacitor_Disc_Small | C1, C2, C3, C5, C9, C10 |
| 2 | C | Capacitor_100uF | C4, C8 |
| 1 | C | Capacitor_10uF | C6 |
| 11 | R | Resistor_small | R1, R2, R3, R4, R5, R6, R8, R9 +3 |
| 1 | R | R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R7 |
Microscope design files
The KiCad project lives in the KabitaShahu/Circuit repository on GitHub; these links point at the commit this page was built from.
Microscope: common questions
How big is the Microscope PCB?
The Microscope measures 133 × 64.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Microscope?
43 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Microscope design files?
From the KabitaShahu/Circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Microscope design in my own project?
The repository has no license, so all rights stay with KabitaShahu. Use it as a reference, and ask the author before reusing the design.
More boards in Circuit
STM32
BLUEPILL
KabitaShahu
69.5 × 85.9 mm35 parts2LNo license0New pi pico
KabitaShahu
77.5 × 87.5 mm32 parts2LNo license0Pi pico
KabitaShahu
70.8 × 94.1 mm27 parts2LNo license0STM32
BLUEPILL NANO
KabitaShahu
67.5 × 74.4 mm27 parts2LNo license0Numatic optocoupler
KabitaShahu
52 × 55.3 mm24 parts2LNo license0Relay power supply
KabitaShahu
107.7 × 98.8 mm11 parts2LNo license0ESP32
ESP32-wrover
KabitaShahu
37.8 × 111.3 mm9 parts2LNo license0