MCT-Lockin

Kajin-0·MCT-Lockin·hardware/rev_a/MCT_LIA_Mini_RevA_capture.kicad_sch

This repository ships a schematic but no board layout.

About the MCT-Lockin PCB

MCT-Lockin is an open source PCB design by Kajin-0, published on GitHub. It is a board, with 49 components from 29 distinct parts.

Other key parts include the OPA1612AID, PCM1804DB and ASEM1-12.288MHZ-L. By type, the board carries 21 capacitors, 19 resistors, 5 connectors, 3 ICs and 1 switch.

It belongs with the audio and test & measurement designs in this gallery.

From the project

A low-cost, low-noise USB digital lock-in amplifier for HgCdTe (MCT) photoconductor testing. Hardware should be deliberately simple and cost-effective; advanced functions belong in reproducible Python/firmware software.

A low-cost, low-noise USB digital lock-in amplifier for HgCdTe (MCT) photoconductor testing. Hardware should be deliberately simple and cost-effective; advanced functions belong in reproducible Python/firmware software.

- AGENTS.md: start here for full project history, decisions, open issues, safety, and handoff. - hardware/mct-reva/: pin-level netlist, component inventory, scripts and calculations for the active MCT design. - hardware/legacy-general-lockin/: earlier 1 Hz–100 kHz general-purpose lock-in concept. Archive only; not active MCT hardware.

Main components on the MCT-Lockin

OPA1612AIDPCM1804DBASEM1-12.288MHZ-L

MCT-Lockin bill of materials (BOM)

49 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
OPA1612AID
U1
1
PCM1804DB
U2
1
ASEM1-12.288MHZ-L
U3
1
MCT_KELVIN_4WAY
J1
1
EXTERNAL_CURRENT_LIMITED_BIAS
J2
1
EXT_REF_TTL_3V3
J3
1
INT_REF_TTL_3V3
J4
1
MCU_AND_POWER_INTERFACE
J5
1
GAIN_SELECT_NO
SW1
1
4.7UF_10V_X7R
4.7uF_10V_X7R
C1
1
15NF
15nF
C2
1
10UF_10V_X7R
10uF_10V_X7R
C3
1
470PF_C0G
470pF_C0G
C4
2
10NF_C0G
10nF_C0G
C5, C6
2
10UF_10V
10uF_10V
C7, C9
9
100NF
100nF
C8, C10, C11, C12, C13, C15, C17, C19 +1
4
10UF
10uF
C14, C16, C18, C20
1
22R
R1
2
0R
R2, R14
1
47K
47k
R3
Show 9 more
QtyPartRefs
2
1k
R4, R17
1
20R
R5
1
6.65R
R6
1
330R
R7
2
10K
10k
R8, R9
4
47R
R10, R11, R12, R13
1
33R
R15
2
100K
100k
R16, R18
1
100R
R19

MCT-Lockin design files

The KiCad project lives in the Kajin-0/MCT-Lockin repository on GitHub; these links point at the commit this page was built from.

MCT-Lockin: common questions

How many components are on the MCT-Lockin?

49 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MCT-Lockin design files?

From the Kajin-0/MCT-Lockin repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the MCT-Lockin design in my own project?

The repository has no license, so all rights stay with Kajin-0. Use it as a reference, and ask the author before reusing the design.

Similar boards