2 open source boards using the PCM1804DB

Real designs built with the PCM1804DB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The PCM1804DB in open source designs

The gallery holds 2 open source boards using the PCM1804DB from 2 GitHub repositories; a typical one measures about 200 × 100 mm and carries around 80 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is ELARA antenna amplifier by MatejGomboc.

What boards using the PCM1804DB are built for

PCM1804DB: common questions

Where can I find a PCM1804DB reference design?

Each of the 2 boards on this page is a real design using the PCM1804DB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the PCM1804DB?

The median is 200 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the PCM1804DB?

By GitHub stars, ELARA antenna amplifier by MatejGomboc, with 5 stars.

Can I simulate one of these boards using the PCM1804DB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part