Datalogger
kakasten·Datalogger·slave/hardware/kicad/analog_inputs.kicad_sch

About the Datalogger PCB
Datalogger is an open source PCB design by kakasten, published on GitHub under the Apache-2.0 license. It is a board, with 84 components from 10 distinct parts.
Other key parts include the TSV772IST. By type, the board carries 32 resistors, 16 test points, 16 diodes, 16 capacitors and 4 ICs.
It belongs with the sensors designs in this gallery.
From the project
This project is the development of a distributed data acquisition platform for race vehicles, designed to provide a modular, scalable, and easy-to-maintain architecture — capable of evolving continuously alongside the team's needs.
This project is the development of a distributed data acquisition platform for race vehicles, designed to provide a modular, scalable, and easy-to-maintain architecture — capable of evolving continuously alongside the team's needs.
Built for Formula SAE vehicles, the system acquires data from analog, digital, frequency, and CAN sensors, transmits the information over a CAN network, and centralizes logging, processing, and telemetry in the Master module.
Main components on the Datalogger
Datalogger bill of materials (BOM)
84 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TSV772IST | SOP65P490X110-8N | IC5, IC6, IC7, IC9 |
| 16 | — | TestPoint_Pad_2.0x2.0mm | TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 +8 |
| 8 | SMBJ15A | D_SMB | D7, D8, D9, D10, D15, D16, D17, D18 |
| 8 | BAT54S | SOT-23 | D11, D12, D13, D14, D19, D20, D21, D22 |
| 8 | 100nF | C_0201_0603Metric | C20, C21, C22, C23, C28, C29, C30, C31 |
| 8 | 100pF | C_0201_0603Metric | C24, C25, C26, C27, C32, C33, C34, C35 |
| 8 | 1kR | R_0805_2012Metric | R8, R9, R10, R11, R24, R25, R26, R27 |
| 8 | 27kR | R_0805_2012Metric | R12, R13, R14, R15, R28, R29, R30, R31 |
| 8 | 10kR | R_0805_2012Metric | R16, R17, R18, R19, R32, R33, R34, R35 |
| 8 | 100R | R_0805_2012Metric | R20, R21, R22, R23, R36, R37, R38, R39 |
Datalogger design files
The KiCad project lives in the kakasten/Datalogger repository on GitHub; these links point at the commit this page was built from.
Datalogger: common questions
How many components are on the Datalogger?
84 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Datalogger design files?
From the kakasten/Datalogger repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Datalogger design in my own project?
Yes, under the terms of its Apache-2.0 license, which kakasten chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956