Wemos baseplate

Karijn·sensemakers-esp32·wemos-baseplate/wemos-baseplate/wemos-baseplate.kicad_pcb

Wemos baseplate PCB layout, top view — open source ESP32 board by Karijn

About the Wemos baseplate PCB

Wemos baseplate is an open source ESP32 PCB design by Karijn, published on GitHub. It is a 4-layer board measuring 138.1 × 55 mm, with 18 components from 5 distinct parts.

Its main chip is the ESP32-MINI-32, from the ESP32 family. By type, the board carries 15 connectors and 3 ICs.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

sensemakers esp32 ontwikkelboard

Wemos baseplate, from the project README
From the project README

Main components on the Wemos baseplate

ESP32-MINI-32

Wemos baseplate bill of materials (BOM)

18 components, 5 distinct parts.

QtyPartRefs
3
ESP32-MINI-32
U1, U2, U3
1
Conn_02x16_Odd_Even
J1
1
Conn_02x16_Odd_Even
J2
11
Conn_01x04
J3, J4, J5, J6, J9, J10, J11, J12 +3
2
Conn_01x04
J7, J8

Wemos baseplate design files

The KiCad project lives in the Karijn/sensemakers-esp32 repository on GitHub; these links point at the commit this page was built from.

Wemos baseplate: common questions

What microcontroller does the Wemos baseplate use?

The Wemos baseplate is built around the ESP32-MINI-32, from the ESP32 family.

How big is the Wemos baseplate PCB?

The Wemos baseplate measures 138.1 × 55 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Wemos baseplate?

18 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Wemos baseplate design files?

From the Karijn/sensemakers-esp32 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Wemos baseplate design in my own project?

The repository has no license, so all rights stay with Karijn. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Wemos baseplate without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in sensemakers-esp32

Similar boards