R2024-02-single
karlp·das-kb4-bara2·hw/r2024-02-single/r2024-02-single.kicad_pcb
About the R2024-02-single PCB
R2024-02-single is an open source STM32 PCB design by karlp, published on GitHub. It is a 4-layer board measuring 94 × 52 mm, with 55 components from 29 distinct parts.
Its main chip is the STM32G431CBUX, from the STM32 family. Other key parts include the FE1.1S, SRV05-4, XC6206P332MR and AP2552W6-7. By type, the board carries 19 resistors, 15 capacitors, 6 ICs, 5 connectors, 5 switches and 3 diodes.
It belongs with the keyboards designs in this gallery.
From the project
das keyboard 4 replacement controller
Main components on the R2024-02-single
R2024-02-single bill of materials (BOM)
55 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FE1.1S FE1.1s | SSOP-28_3.9x9.9mm_P0.635mm | U1 |
| 1 | STM32G431CBUX STM32G431CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 2 | SRV05-4 | SOT-23-6 | U3, U4 |
| 1 | XC6206P332MR XC6206PxxxMR | SOT-23-3 | U5 |
| 1 | AP2552W6-7 AP2552W6 | SOT-23-6 | U6 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 2 | 902-141A1011D10100 USB_A | USB_A_Stewart_SS-52100-001_Horizontal | J1, J2 |
| 1 | AFA07-S26FCC-00 Conn_01x26_Socket | TE_2-84952-6_1x26-1MP_P1.0mm_Horizontal | J3 |
| 1 | USB-TYPE-C-018 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J4 |
| 1 | HB-PH9-12725PB2GOB Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical_SMD | J5 |
| 1 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | TS-1187A-B-A-B PWR | SW_SPST_TL3342 | SW1 |
| 1 | TS-1187A-B-A-B MUTE | SW_SPST_TL3342 | SW2 |
| 1 | TS-1187A-B-A-B PREV | SW_SPST_TL3342 | SW3 |
| 1 | TS-1187A-B-A-B PLAY_PAUSE | SW_SPST_TL3342 | SW4 |
| 1 | TS-1187A-B-A-B NEXT | SW_SPST_TL3342 | SW5 |
| 1 | 333-2SURC/S530-A3 NUM_LOCK | LED_D5.0mm | D1 |
| 1 | 333-2SURC/S530-A3 CAPS_LOCK | LED_D5.0mm | D2 |
| 1 | 333-2SURC/S530-A3 SCROLL_LOCK | LED_D5.0mm | D3 |
| 5 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C1, C2, C4, C7, C9 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C3 |
| 2 | 0603B103K500NT 10nF | C_0603_1608Metric | C5, C6 |
| 5 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C8, C10, C12, C13, C14 |
| 2 | CL31A107MQHNNNE 100uF | C_1206_3216Metric | C11, C16 |
| 1 | 0603WAF2701T5E 2k7/1% | R_0603_1608Metric | R1 |
| 11 | 0603WAF1002T5E 10k | R_0603_1608Metric | R2, R5, R6, R7, R8, R11, R12, R13 +3 |
| 2 | 0603WAF5101T5E 5k1 | R_0603_1608Metric | R3, R4 |
| 4 | 0603WAF2200T5E 220 | R_0603_1608Metric | R9, R16, R17, R18 |
| 1 | 0603WAF0000T5E 0 | R_0603_1608Metric | R10 |
R2024-02-single design files
The KiCad project lives in the karlp/das-kb4-bara2 repository on GitHub; these links point at the commit this page was built from.
R2024-02-single: common questions
What microcontroller does the R2024-02-single use?
The R2024-02-single is built around the STM32G431CBUX, from the STM32 family.
How big is the R2024-02-single PCB?
The R2024-02-single measures 94 × 52 mm, has 4 copper layers and is 1.596 mm thick.
How many components are on the R2024-02-single?
55 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the R2024-02-single design files?
From the karlp/das-kb4-bara2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the R2024-02-single design in my own project?
The repository has no license, so all rights stay with karlp. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the R2024-02-single without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in das-kb4-bara2
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k