Lvl4
KarpelesLab·multivolt·boards/lvl4/lvl4.kicad_pcb
About the Lvl4 PCB
Lvl4 is an open source PCB design by KarpelesLab, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 12.7 × 30.2 mm, with 20 components from 6 distinct parts.
Other key parts include the SN74LXC1T45DCKR. By type, the board carries 10 capacitors, 4 ICs, 4 resistors and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Two KiCad 10 boards, designed for JLCPCB assembly:
Two KiCad 10 boards, designed for JLCPCB assembly:
\*Parts only, JLCPCB prices at qty 50/100, October 2026. Extended-part setup fees, PCB and assembly cost come on top.
Positions: the inner rail holes are 0.85″ (21.59 mm) from the centreline and the outer ones 0.95″ (24.13 mm). Pins: each side has two 2-pin headers, 5 holes (12.7 mm) apart along the rail, so the board sits firmly. Polarity: the order is GND, + on both sides, reading left to right with the USB connector facing away from the breadboard. To flip it to + then GND, set RAILORDER = "+G" in designs/psu.py and regenerate. Mounting…

Main components on the Lvl4
Lvl4 bill of materials (BOM)
20 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SN74LXC1T45DCKR SN74LXC1T45DCK | SOT-363_SC-70-6 | U1, U2, U3, U4 |
| 1 | C492409 A side | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | C492409 B side | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 2 | 1UF 1uF | C_0402_1005Metric | C1, C2 |
| 8 | 100NF 100nF | C_0402_1005Metric | C11, C12, C13, C14, C21, C22, C23, C24 |
| 4 | 100K 100k | R_0402_1005Metric | R1, R2, R3, R4 |
Lvl4 design files
The KiCad project lives in the KarpelesLab/multivolt repository on GitHub; these links point at the commit this page was built from.
Lvl4: common questions
How big is the Lvl4 PCB?
The Lvl4 measures 12.7 × 30.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lvl4?
20 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lvl4 design files?
From the KarpelesLab/multivolt repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lvl4 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which KarpelesLab chose for the repository.
More boards in multivolt
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k