Mvpsu
KarpelesLab·multivolt·boards/mvpsu/mvpsu.kicad_pcb
About the Mvpsu PCB
Mvpsu is an open source PCB design by KarpelesLab, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 60 × 57 mm, with 87 components from 40 distinct parts.
Other key parts include the CH224A, HT7533-1, TPS62933PDRLR and INA301A1IDGKR. By type, the board carries 39 resistors, 22 capacitors, 10 connectors, 6 ICs, 6 diodes and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Two KiCad 10 boards, designed for JLCPCB assembly:
Two KiCad 10 boards, designed for JLCPCB assembly:
\*Parts only, JLCPCB prices at qty 50/100, October 2026. Extended-part setup fees, PCB and assembly cost come on top.
Positions: the inner rail holes are 0.85″ (21.59 mm) from the centreline and the outer ones 0.95″ (24.13 mm). Pins: each side has two 2-pin headers, 5 holes (12.7 mm) apart along the rail, so the board sits firmly. Polarity: the order is GND, + on both sides, reading left to right with the USB connector facing away from the breadboard. To flip it to + then GND, set RAILORDER = "+G" in designs/psu.py and regenerate. Mounting…

Main components on the Mvpsu
Mvpsu bill of materials (BOM)
87 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH224A | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U1 |
| 1 | HT7533-1 | SOT-89-3 | U2 |
| 2 | TPS62933PDRLR TPS62933P | SOT-583-8 | U3, U4 |
| 2 | INA301A1IDGKR INA301A1 | VSSOP-8_3x3mm_P0.65mm | U5, U6 |
| 1 | 2N7002DW | SOT-363_SC-70-6 | Q1 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C2691448 AUX OUT | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 2 | C492423 VSEL | PinHeader_2x06_P2.54mm_Vertical | J10, J30 |
| 2 | C492401 ILIM 1A | PinHeader_1x02_P2.54mm_Vertical | J11, J31 |
| 2 | C492401 RAIL L | PinHeader_1x02_P2.54mm_Vertical | J12, J13 |
| 2 | C492401 RAIL R | PinHeader_1x02_P2.54mm_Vertical | J32, J33 |
| 1 | C318884 RESET | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | SMAJ15A | D_SMA | D1 |
| 1 | KT-0603Y PD | LED_0603_1608Metric | D2 |
| 2 | KT-0603YG OK | LED_0603_1608Metric | D10, D30 |
| 2 | KT-0603R OC | LED_0603_1608Metric | D11, D31 |
| 2 | FXL0630-4R7-M 4.7uH | L_Changjiang_FXL0630 | L1, L2 |
| 2 | C52923 1uF 25V | C_0402_1005Metric | C1, C2 |
| 3 | 10UF 10uF | C_0603_1608Metric | C3, C16, C36 |
| 1 | 1UF 1uF | C_0402_1005Metric | C4 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C12891 22uF 25V | C_1206_3216Metric | C10, C30 |
| 6 | 100NF 100nF | C_0402_1005Metric | C11, C12, C17, C31, C32, C37 |
| 6 | C29277 22uF 10V | C_0805_2012Metric | C13, C14, C15, C33, C34, C35 |
| 2 | 4.7UF 4.7uF | C_0402_1005Metric | C18, C38 |
| 1 | 6.8K 6.8k | R_0402_1005Metric | R1 |
| 5 | 1k | R_0402_1005Metric | R2, R24, R27, R44, R47 |
| 1 | 10K 10k | R_0402_1005Metric | R3 |
| 2 | 50M 50m | R_1206_3216Metric | R10, R30 |
| 2 | 6.34K 6.34k | R_0402_1005Metric | R11, R31 |
| 2 | 2.43K 2.43k | R_0402_1005Metric | R12, R32 |
| 2 | 1.62K 1.62k | R_0402_1005Metric | R13, R33 |
| 2 | 2.26K 2.26k | R_0402_1005Metric | R14, R34 |
| 2 | 1.4K 1.4k | R_0402_1005Metric | R15, R35 |
| 2 | 1.5K 1.5k | R_0402_1005Metric | R16, R36 |
| 2 | 2.94K 2.94k | R_0402_1005Metric | R17, R37 |
| 2 | 1M | R_0402_1005Metric | R18, R38 |
| 4 | 100K 100k | R_0402_1005Metric | R19, R20, R39, R40 |
| 4 | 24.9K 24.9k | R_0402_1005Metric | R21, R22, R41, R42 |
| 2 | 330 | R_0402_1005Metric | R23, R43 |
| 4 | 10 | R_0402_1005Metric | R25, R26, R45, R46 |
Mvpsu design files
The KiCad project lives in the KarpelesLab/multivolt repository on GitHub; these links point at the commit this page was built from.
Mvpsu: common questions
How big is the Mvpsu PCB?
The Mvpsu measures 60 × 57 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mvpsu?
87 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mvpsu design files?
From the KarpelesLab/multivolt repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mvpsu design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which KarpelesLab chose for the repository.
More boards in multivolt
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k