C64RAMCartTOP
Kayto·C64-RAM-Cart·kicad/C64RAMCartTOP.kicad_pcb
About the C64RAMCartTOP PCB
C64RAMCartTOP is an open source PCB design by Kayto, published on GitHub. It is a 2-layer board measuring 134.4 × 120 mm, with 25 components from 14 distinct parts.
Other key parts include the 2764, 74LS74, 6821, 74LS138 and KM62256CLP. By type, the board carries 11 ICs, 5 resistors, 3 capacitors, 2 switches, 2 diodes and 1 connector.
It belongs with the retro computing designs in this gallery.
From the project
Super Luxus CMOS RAM Platine from the 64'er magazine dated March 1989
Please note this PCB remains untested so please review and understand the risk in proceeding. I do hope to pick up in 2024 so watch this space.
C64 Cartridges were convenient and easy to use. Programs on cartridge loaded instantly. Typically cartridges used EPROMs (Erasable Programmable Read-Only Memories). The only downside of ROM was the inconvenience of making quick changes with the need for a seperate EPROM burner and an eraser. Contemporary articles note that EPROMS were relatively expensive at $25 each and the need for a burner and eraser equating to around $200. As RAM became cheaper…

Main components on the C64RAMCartTOP
C64RAMCartTOP bill of materials (BOM)
25 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2764 | DIP-28_W15.24mm_Socket | U1 |
| 1 | 74LS74 | DIP-14_W7.62mm_Socket | U2 |
| 2 | 6821 | DIP-40_W15.24mm_Socket | U3, U4 |
| 1 | 74LS138 | DIP-16_W7.62mm_Socket | U5 |
| 6 | KM62256CLP | DIP-28_W15.24mm_Socket | U6, U7, U8, U9, U10, U11 |
| 1 | C64-Exp-Port_C64-Exp-Port | C64_Expansion_Port | J1 |
| 1 | Battery_Cell | Varta 2.4v | BT1 |
| 2 | SW_SPST | PinHeader_1x03_P2.54mm_Vertical | SW1, SW3 |
| 2 | D_Small | D_DO-15_P10.16mm_Horizontal | D1, D2 |
| 2 | C | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 1 | C3 | C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 3 | R_Small | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | R_Network08 | R_Array_SIP9 | RN1 |
| 1 | R_Network07 | R_Array_SIP8 | RN2 |
C64RAMCartTOP design files
The KiCad project lives in the Kayto/C64-RAM-Cart repository on GitHub; these links point at the commit this page was built from.
C64RAMCartTOP: common questions
How big is the C64RAMCartTOP PCB?
The C64RAMCartTOP measures 134.4 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the C64RAMCartTOP?
25 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the C64RAMCartTOP design files?
From the Kayto/C64-RAM-Cart repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the C64RAMCartTOP design in my own project?
The repository has no license, so all rights stay with Kayto. Use it as a reference, and ask the author before reusing the design.
More boards in C64-RAM-Cart
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k