14 open source boards using the KM62256CLP

Real designs built with the KM62256CLP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the KM62256CLP

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the KM62256CLP connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF.
GNDpin 14Connected to: GND 91%
VCCpin 28Connected to: 5V 82% · a signal 18%
  • Decoupling capacitor on 55% · 100 nF (6)

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TI-CUBE-Memory by VE7PMC, C128-bytewide color ram-1571cr expansion by ytmytm, Tinyfs by sittner and 1551-RAMBOard by ytmytm.

The KM62256CLP in open source designs

The gallery holds 14 open source boards using the KM62256CLP from 11 GitHub repositories; a typical one measures about 135.7 × 100 mm and carries around 35 components.

93% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is TI-CUBE-Memory by VE7PMC.

Microcontrollers on boards using the KM62256CLP

What boards using the KM62256CLP are built for

KM62256CLP: common questions

Where can I find a KM62256CLP reference design?

Each of the 14 boards on this page is a real design using the KM62256CLP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the KM62256CLP VCC pin?

The VCC pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the KM62256CLP.

What parts are used alongside the KM62256CLP?

The 74LS00, 74LS138, 27C256, 27C512 and 74HC245 appear in the most repositories here.

Which microcontrollers do boards using the KM62256CLP use?

Most are built on AVR/Arduino (2).

How big is a typical board using the KM62256CLP?

The median is 135.7 × 100 mm, and 93% are two-layer designs.

What is the most popular open source board using the KM62256CLP?

By GitHub stars, TI-CUBE-Memory by VE7PMC, with 10 stars.

Can I simulate one of these boards using the KM62256CLP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part