STM32-Sumo-Robot-Controller

keer-nova74·STM32-Sumo-Robot-Controller-PCB

STM32-Sumo-Robot-Controller PCB layout, top view — open source STM32 board by keer-nova74

About the STM32-Sumo-Robot-Controller PCB

STM32-Sumo-Robot-Controller is an open source STM32 PCB design by keer-nova74, published on GitHub. It is a 4-layer board measuring 97.7 × 58.5 mm, with 93 components from 43 distinct parts.

Its main chip is the STM32L476RGT6, from the STM32 family. Other key parts include the USBLC6-2SC6, RT8259, AMS1117-3.3, TPS2116DRL and TB6612FNG. By type, the board carries 36 capacitors, 23 resistors, 10 diodes, 8 connectors, 7 ICs and 3 fuses.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

A robotics controller PCB project using an STM32 microcontroller, dual motor drivers, sensor interfaces, and power management, designed using KiCad.

This project focuses on designing a custom Printed Circuit Board (PCB) for an autonomous sumo robot using KiCad. The controller is intended to integrate a microcontroller, motor drivers, sensor interfaces, and power management into a compact robotics hardware platform.

- STM32 microcontroller interface for robot control - Dual DC motor driver circuit - Infrared sensor interfaces for opponent and boundary detection - Battery power input and distribution - Voltage regulation for logic and peripheral circuits - Motor and sensor connectors - Programming and debugging interface - Compact PCB…

Main components on the STM32-Sumo-Robot-Controller

STM32-Sumo-Robot-Controller bill of materials (BOM)

93 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
STM32L476RGT6
U2
1
RT8259
U3
1
AMS1117-3.3
U4
1
TPS2116DRL
U5
2
TB6612FNG
U7, U8
1
FDS6681Z
Q1
1
32KHZ768
32KHz768
X1
1
16MHZ
16MHz
X2
1
BATT1_CONN
J1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J2
1
BATT2_CONN
J3
1
URM09_CONN
J7
1
C265101
LD_FRONT_LEFT_CONN
J10
1
C265101
LD_FRONT_RIGHT_CONN
J11
1
C265101
LD_BACK_LEFT_CONN
J12
1
C265101
LD_BACK_RIGHT_CONN
J13
2
750MA
750mA
F1, F2
1
1206L110TH1
F3
1
SW_Push
SW2
Show 23 more
QtyPartRefs
2
B5819W
D1, D2
7
C2286
RED_LED
D3, D4, D6, D7, D8, D9, D10
1
C2290
WHITE_LED
D5
1
120R
FB1
1
6.8UH
6.8uH
L1
4
1u
C1, C2, C4, C27
7
100N
100n
C3, C6, C7, C8, C9, C12, C13
2
10N
10n
C5, C21
2
8.2P
8.2p
C10, C11
2
15P
15p
C14, C15
1
4U7
4u7
C16
8
10U
10u
C17, C19, C22, C26, C30, C31, C34, C35
3
22U
22u
C18, C24, C25
7
0.1U
0.1u
C20, C23, C28, C29, C32, C33, C36
2
100K
100k
R1, R10
6
10K
R2, R5, R6, R7, R8, R12
2
5K1
R3, R4
3
220R
R9, R17, R18
1
33K
R11
1
62K
62k
R13
1
12K
12k
R14
2
1K
R15, R16
5
470R
R19, R20, R21, R22, R23

STM32-Sumo-Robot-Controller design files

The KiCad project lives in the keer-nova74/STM32-Sumo-Robot-Controller-PCB repository on GitHub; these links point at the commit this page was built from.

STM32-Sumo-Robot-Controller: common questions

What microcontroller does the STM32-Sumo-Robot-Controller use?

The STM32-Sumo-Robot-Controller is built around the STM32L476RGT6, from the STM32 family.

How big is the STM32-Sumo-Robot-Controller PCB?

The STM32-Sumo-Robot-Controller measures 97.7 × 58.5 mm, has 4 copper layers and is 1.5842 mm thick.

How many components are on the STM32-Sumo-Robot-Controller?

93 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32-Sumo-Robot-Controller design files?

From the keer-nova74/STM32-Sumo-Robot-Controller-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32-Sumo-Robot-Controller design in my own project?

The repository has no license, so all rights stay with keer-nova74. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-Sumo-Robot-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards