Li-Ion-Battery-Charger-PCB-Project
kesting-log·Li-Ion-Battery-Charger-PCB-Project·PCB/KiCad_Files/Lithium-Ion Battery Charger.kicad_pcb
About the Li-Ion-Battery-Charger-PCB-Project
Li-Ion-Battery-Charger-PCB-Project is an open source PCB design by kesting-log, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 102.3 × 48.8 mm, with 29 components from 24 distinct parts.
Other key parts include the MCP73832-2-OT and MIC2288YML-TR. By type, the board carries 7 resistors, 5 test points, 5 diodes, 4 capacitors, 2 ICs and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
Power electronics project for a custom PCB in KiCad that charges a low-voltage lithium-ion battery from a DC/DC voltage regulator and discharges to an external device via a USB-C connector.
Video of the Fabricated PCB Charging a Device:
https://github.com/user-attachments/assets/34a2994c-56c9-4d0d-9e32-f9736337a1a2
The voltage regulator charging the Lithium-Ion battery regulates a 5V DC input (via Micro USB-B) to the maximum voltage of the battery (4.2V). As the battery is used to charge an external device, the voltage decreases until it reaches 3V, where it dies and can no longer supply the external device. When the battery is being used to charge an external device, the voltage is increased back to 5V via an output regulated boost converter. The output voltage is determined…

Main components on the Li-Ion-Battery-Charger-PCB-Project
Li-Ion-Battery-Charger-PCB-Project bill of materials (BOM)
29 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73832-2-OT | SOT-23-5_HandSoldering | U1 |
| 1 | MIC2288YML-TR | MLF-8_ML_MCH | U2 |
| 2 | BSS84 | SOT-23 | Q1, Q2 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10104110_Horizontal | J1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J2 |
| 1 | 18650 | BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | 5V_IN | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | 5V_OUT | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 1 | GNDPWR | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP3 |
| 1 | VBAT | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP4 |
| 1 | GND | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP5 |
| 2 | D_Schottky | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D3 |
| 1 | Green | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | SMAJ5.0A | D_SMA | D4 |
| 1 | Orange | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D5 |
| 1 | 10u | L_Abracon_ASPI-4030S | L1 |
| 3 | 4.7u | C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C1, C2, C3 |
| 1 | 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 9.1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 3k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 2 | 56k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
| 1 | 1.6k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
Li-Ion-Battery-Charger-PCB-Project design files
The KiCad project lives in the kesting-log/Li-Ion-Battery-Charger-PCB-Project repository on GitHub; these links point at the commit this page was built from.
Li-Ion-Battery-Charger-PCB-Project: common questions
How big is the Li-Ion-Battery-Charger-PCB-Project?
The Li-Ion-Battery-Charger-PCB-Project measures 102.3 × 48.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Li-Ion-Battery-Charger-PCB-Project?
29 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Li-Ion-Battery-Charger-PCB-Project design files?
From the kesting-log/Li-Ion-Battery-Charger-PCB-Project repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Li-Ion-Battery-Charger-PCB-Project design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which kesting-log chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k