Synthy
kgiorgi·synthy·hardware/kicad/synthy/synthy.kicad_pcb
About the Synthy PCB
Synthy is an open source PCB design by kgiorgi, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 80 components from 31 distinct parts.
Other key parts include the LMC555CN, 74HC4017 and LM386. By type, the board carries 27 resistors, 17 diodes, 16 capacitors, 4 ICs, 3 switches and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Synthy is a small 8-step synth with no microcontroller and no code. It plays a looping melody of 8 notes, and you set each note by turning its own knob. Everything runs off USB-C.
Synthy is a small 8-step synth with no microcontroller and no code. It plays a looping melody of 8 notes, and you set each note by turning its own knob. Everything runs off USB-C.
One 555 timer ticks like a metronome. Every tick moves a 4017 counter on to the next step, so the 8 steps light up one after another and then start over.
Each step has its own knob, LED and switch. When a step is active, its knob sets how fast a second 555 timer buzzes, and that's the note you hear. The LED shows which step is playing, and the switch can turn a step off so it becomes a rest.

Main components on the Synthy
Synthy bill of materials (BOM)
80 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LMC555CN | DIP-8_W7.62mm_Socket | U1, U4 |
| 1 | 74HC4017 | DIP-16_W7.62mm_Socket | U2 |
| 1 | LM386 | DIP-8_W7.62mm_Socket | U3 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | A100k | Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 9 | B100k | Potentiometer_Alps_RK09K_Single_Vertical | RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9 +1 |
| 1 | B50k | Potentiometer_Alps_RK09K_Single_Vertical | RV11 |
| 1 | SW_DIP_x08 | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW1 |
| 2 | SW_SPDT | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW2, SW3 |
| 9 | LED | LED_D3.0mm | D2, D4, D6, D8, D10, D12, D14, D16 +1 |
| 8 | 1N4148 | D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D5, D7, D9, D11, D13, D15, D17, D19 |
| 2 | 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C10 |
| 2 | 100µF | CP_Radial_D6.3mm_P2.50mm | C3, C13 |
| 5 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C5, C7, C8, C14 |
| 2 | 10µF | CP_Radial_D5.0mm_P2.00mm | C6, C15 |
| 1 | 47nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C9 |
| 1 | 4.7nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C11 |
| 1 | 1µF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C12 |
| 1 | 47nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C16 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220µF | CP_Radial_D8.0mm_P3.50mm | C17 |
| 2 | 5.1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R27 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 8 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11, R13, R15, R17, R19, R21, R23, R25 |
| 8 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R12, R14, R16, R18, R20, R22, R24, R26 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R28 |
Synthy design files
The KiCad project lives in the kgiorgi/synthy repository on GitHub; these links point at the commit this page was built from.
Synthy: common questions
How big is the Synthy PCB?
The Synthy measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Synthy?
80 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Synthy design files?
From the kgiorgi/synthy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Synthy design in my own project?
Yes, under the terms of its MIT license, which kgiorgi chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687