Daneben project
Kirito077·daneben-project·hardware/Daneben circuit board/Daneben circuit board.kicad_pcb
About the Daneben project PCB
Daneben project is an open source PCB design by Kirito077, published on GitHub. It is a 2-layer board measuring 17 × 8.5 mm, with 6 components from 5 distinct parts.
By type, the board carries 2 diodes, 2 resistors, 1 connector and 1 switch.
It belongs with the audio, iot & wireless and power & battery designs in this gallery.
From the project
Daneben! — Smart municipal waste bin detection system (HSNR Mikrocontroller)
Course: Mikro-controller (5. Semester) · Hochschule Niederrhein (HSNR) Antigravity Project: daneben-project (C:\Users\ekwug\.gemini\antigravity\projects\daneben-project) Workspace: C:\Users\ekwug\OneDrive\Documents\Deutschland\HSNR\Studium\5.Semester\Mikro-contoller\Daneben Projekt
📁 docs/ CONVERSATIONHISTORY.md — Complete transcript and architectural evolution of all discussions, trade-offs (RoboDog vs. Daneben), and engineering decisions. ProjectWorkflowandMarketAnalysis.md — Problem statement, market analysis (municipalities, smart cities, housing), SaaS revenue model, and 5-year lifespan…
Daneben project bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | Schalter-LED | LED_D5.0mm | D1 |
| 1 | Betriebs-LED | LED_D5.0mm | D2 |
| 2 | 330 ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
Daneben project design files
The KiCad project lives in the Kirito077/daneben-project repository on GitHub; these links point at the commit this page was built from.
Daneben project: common questions
How big is the Daneben project PCB?
The Daneben project measures 17 × 8.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Daneben project?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Daneben project design files?
From the Kirito077/daneben-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Daneben project design in my own project?
The repository has no license, so all rights stay with Kirito077. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k