Midi keyboard

kiwo17·midi_keyboard·schematic/keypad/keypad.kicad_pcb

Midi keyboard PCB layout, top view — open source ESP32 board by kiwo17

About the Midi keyboard PCB

Midi keyboard is an open source ESP32 PCB design by kiwo17, published on GitHub. It is a 2-layer board measuring 95 × 100 mm, with 7 components from 4 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 5 switches, 1 IC and 1 connector.

It belongs with the audio and keyboards designs in this gallery.

From the project

a mini portable keyboard

My Interest have always been diverse, but music and electronics are the ones I constantly find myself drawn back to. With this project I am connecting both, by merging the creative and expressive qualities of music with the physical and technical structure of electronics.

Because I didn't want to use Bourns potentiometer sliders in my keypad I needed to replace them with a different component. I decided to add another encoder because I find them visually pleasing. Initially I wanted to use three encoders, but due to a shortage of GPIOs pins that wans't possible.

Midi keyboard, from the project README
From the project README

Main components on the Midi keyboard

Midi keyboard bill of materials (BOM)

7 components, 4 distinct parts.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
Capacitive Touch Buttons
J1
3
SW_Push
SW1, SW2, SW3
2
RotaryEncoder_Switch_MP
SW4, SW5

Midi keyboard design files

The KiCad project lives in the kiwo17/midi_keyboard repository on GitHub; these links point at the commit this page was built from.

Midi keyboard: common questions

What microcontroller does the Midi keyboard use?

The Midi keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the Midi keyboard PCB?

The Midi keyboard measures 95 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Midi keyboard?

7 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Midi keyboard design files?

From the kiwo17/midi_keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Midi keyboard design in my own project?

The repository has no license, so all rights stay with kiwo17. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Midi keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards