Pack

kkrzysztofik·ASG_AirsoftCounter·hardware/kicad/pack.kicad_pcb

Pack PCB layout, top view — open source board by kkrzysztofik

About the Pack PCB

Pack is an open source PCB design by kkrzysztofik, published on GitHub under the MIT license. It is a 2-layer board measuring 96 × 90 mm, with 78 components from 27 distinct parts.

Other key parts include the MT3608. By type, the board carries 4 fuses, 1 IC, 1 diode and 1 inductor.

It belongs with the power & battery designs in this gallery.

From the project

A hand-held device for the "airsoftcoin" airsoft team game: NFC player cards, timed mining rounds and a display for the game state. This repository holds the successor hardware — carrier, battery pack and LiPo boards, a printed insert, and the firmware — next to the original Ardu

A hand-held device for the "airsoftcoin" airsoft team game: NFC player cards, timed mining rounds and a display for the game state. This repository holds the successor hardware — carrier, battery pack and LiPo boards, a printed insert, and the firmware — next to the original Arduino build it replaces.

The boards are generated, not hand-drawn: each one is a Python module in hardware/ (parts, nets, placement), and the schematic, board, autorouting, ERC/DRC and fab package come out of it. Edit the module, not the KiCad files.

Main components on the Pack

Pack bill of materials (BOM)

78 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MT3608
U1
3
22uF 25V
C_IN1, C_OUT1, C_OUT2
2
1uF
C_LDO1, C_LDO2
3
100nF
C_MCU1, C_MON1, C_MON2
1
4u7
C_MCU2
4
SS34
D_CB1, D_CB2, D_CB3, D_CB4
5
B5819W
D_OR1, D_OR2, D_OR3, D_OR4, D_OR5
4
C48332
5A fuse
F1, F2, F3, F4
1
2A PTC
F_SYS1
1
KEY
J_KEY1
1
PWR
J_PWR1
1
HC-TYPE-C-16P-01A
J_USB1
8
AO3401A
Q_A1, Q_A2, Q_A3, Q_A4, Q_B1, Q_B2, Q_B3, Q_B4
4
BSS138
Q_N1, Q_N2, Q_N3, Q_N4
1
5K1
5k1
RT1
1
30K
30k
RT2
3
0R
R_BAT1, R_BAT2, R_SYS1
2
5k1
R_CC1, R_CC2
1
75k
R_FB1
5
10k
R_FB2, R_NTC1, R_NTC2, R_NTC3, R_NTC4
Show 7 more
QtyPartRefs
4
1M
R_GS1, R_GS2, R_GS3, R_GS4
4
100k
R_PD1, R_PD2, R_PD3, R_PD4
4
10mOhm
R_SH1, R_SH2, R_SH3, R_SH4
8
10R
R_SNSF1, R_SNSF2, R_SNSF3, R_SNSF4, R_SNSS1, R_SNSS2, R_SNSS3, R_SNSS4
4
1k
R_SW1, R_SW2, R_SW3, R_SW4
1
SS34
D1
1
C2046332
10uH 2A
L1

Pack design files

The KiCad project lives in the kkrzysztofik/ASG_AirsoftCounter repository on GitHub; these links point at the commit this page was built from.

Pack: common questions

How big is the Pack PCB?

The Pack measures 96 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pack?

78 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pack design files?

From the kkrzysztofik/ASG_AirsoftCounter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pack design in my own project?

Yes, under the terms of its MIT license, which kkrzysztofik chose for the repository.

More boards in ASG_AirsoftCounter

Similar boards