HardLabs

Pcb ttl ftdi esp adapter

klein0r·pcb-ttl-ftdi-esp-adapter

Pcb ttl ftdi esp adapter layout, top view — open source ESP8266 board by klein0r
Simulate this board

About the Pcb ttl ftdi esp adapter

Pcb ttl ftdi esp adapter is an open source ESP8266 PCB design by klein0r, published on GitHub under the MIT license. It is a 2-layer board measuring 73.1 × 18.3 mm, with 11 components from 8 distinct parts.

Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the AMS1117-3.3. By type, the board carries 3 connectors, 3 resistors, 2 ICs, 2 capacitors and 1 switch.

It belongs with the iot & wireless and usb & debug tools designs in this gallery.

From the project

PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

Pcb ttl ftdi esp adapter, from the project README
From the project README

Main components on the Pcb ttl ftdi esp adapter

AMS1117-3.3ESP-12F

Pcb ttl ftdi esp adapter bill of materials (BOM)

11 components, 8 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP-12F
U2
1
RJ10
J1
1
Conn_01x06_Male
J2
1
USB_B_Micro
J3
1
SW_Push
SW1
2
100µF
C1, C2
3
10kΩ
R1, R2, R3

Pcb ttl ftdi esp adapter design files

The KiCad project lives in the klein0r/pcb-ttl-ftdi-esp-adapter repository on GitHub; these links point at the commit this page was built from.

Pcb ttl ftdi esp adapter: common questions

What microcontroller does the Pcb ttl ftdi esp adapter use?

The Pcb ttl ftdi esp adapter is built around the ESP-12F, from the ESP8266 family.

How big is the Pcb ttl ftdi esp adapter?

The Pcb ttl ftdi esp adapter measures 73.1 × 18.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb ttl ftdi esp adapter?

11 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb ttl ftdi esp adapter design files?

From the klein0r/pcb-ttl-ftdi-esp-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb ttl ftdi esp adapter design in my own project?

Yes, under the terms of its MIT license, which klein0r chose for the repository.

Can I test firmware for the Pcb ttl ftdi esp adapter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

Similar boards