Precision Analog Isolation Amplifier
KN-NaMi·Precision-Analog-Isolation-Amplifier·Precision Analog Isolation Amplifier/Precision Analog Isolation Amplifier.kicad_pcb
About the Precision Analog Isolation Amplifier PCB
Precision Analog Isolation Amplifier is an open source PCB design by KN-NaMi, published on GitHub. It is a 2-layer board measuring 63.5 × 44 mm, with 58 components from 25 distinct parts.
Other key parts include the ADA4899-1YRDZ, HCNR201 and ADA4522. By type, the board carries 20 capacitors, 11 resistors, 9 diodes, 4 ICs, 4 connectors and 4 fuses.
It belongs with the audio designs in this gallery.
Main components on the Precision Analog Isolation Amplifier
Precision Analog Isolation Amplifier bill of materials (BOM)
58 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADA4899-1YRDZ | SOIC127P600X175-9N | IC1 |
| 1 | HCNR201 | HCNR201300E | U1 |
| 2 | ADA4522 | SOIC127P600X175-8N | U2, U4 |
| 1 | --- | SOT-23_Handsoldering | Q1 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_Coaxial | CONN_732511350_MOL | J3, J4 |
| 4 | Fuse | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | F1, F2, F3, F4 |
| 1 | 50k | Potentiometer_Bourns_3386W_Horizontal | RV1 |
| 1 | --- | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 4 | SMAJ15A | D_SMA | D2, D3, D4, D5 |
| 4 | LED | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7, D8, D9 |
| 4 | FerriteBead_Small | L_1206_3216Metric | FB1, FB2, FB3, FB4 |
| 4 | 47u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C9, C13 |
| 4 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6, C10, C14 |
| 8 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C7, C8, C11, C12, C15, C16 |
| 1 | 47p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 33p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 2 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20 |
| 1 | 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 270 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6.8k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 200k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 5 | 33k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8, R9, R10, R11 |
| 1 | 174k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 50R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
Precision Analog Isolation Amplifier design files
The KiCad project lives in the KN-NaMi/Precision-Analog-Isolation-Amplifier repository on GitHub; these links point at the commit this page was built from.
Precision Analog Isolation Amplifier: common questions
How big is the Precision Analog Isolation Amplifier PCB?
The Precision Analog Isolation Amplifier measures 63.5 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Precision Analog Isolation Amplifier?
58 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Precision Analog Isolation Amplifier design files?
From the KN-NaMi/Precision-Analog-Isolation-Amplifier repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Precision Analog Isolation Amplifier design in my own project?
The repository has no license, so all rights stay with KN-NaMi. Use it as a reference, and ask the author before reusing the design.
More boards in Precision-Analog-Isolation-Amplifier
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687