Separator filtr skladowa stala
KN-NaMi·Precision-Analog-Isolation-Amplifier·Inverter/Separator_filtr_skladowa_stala.kicad_pcb
About the Separator filtr skladowa stala PCB
Separator filtr skladowa stala is an open source PCB design by KN-NaMi, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 38 components from 22 distinct parts.
Other key parts include the ADA4622-2xCP. By type, the board carries 18 resistors, 12 capacitors, 3 connectors, 2 ICs and 2 diodes.
It belongs with the audio designs in this gallery.
Main components on the Separator filtr skladowa stala
Separator filtr skladowa stala bill of materials (BOM)
38 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADA4622-2xCP | SOIC127P600X175-8N | U1, U2 |
| 2 | Conn_Coaxial | CONN_732511350_MOL | J1, J3 |
| 1 | Power | PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | 20k | Potentiometer_Bourns_3386W_Horizontal | RV1 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 6.8n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 1 | 39n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 2 | 49u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C9 |
| 2 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C10 |
| 4 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C11, C12 |
| 1 | 100R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R17 |
| 2 | 33k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 39R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R13 |
| 2 | 2.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R14 |
| 1 | 1.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 2 | 300R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R18 |
| 2 | 680R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R15 |
| 2 | 470R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R16 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 560R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 2R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
Separator filtr skladowa stala design files
The KiCad project lives in the KN-NaMi/Precision-Analog-Isolation-Amplifier repository on GitHub; these links point at the commit this page was built from.
Separator filtr skladowa stala: common questions
How big is the Separator filtr skladowa stala PCB?
The Separator filtr skladowa stala measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Separator filtr skladowa stala?
38 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Separator filtr skladowa stala design files?
From the KN-NaMi/Precision-Analog-Isolation-Amplifier repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Separator filtr skladowa stala design in my own project?
The repository has no license, so all rights stay with KN-NaMi. Use it as a reference, and ask the author before reusing the design.
More boards in Precision-Analog-Isolation-Amplifier
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687