OSMC Module Joystick V2
About the OSMC Module Joystick V2
OSMC Module Joystick V2 is an open source PCB design by Koalaven, published on GitHub. It is a 4-layer board measuring 34 × 41 mm, with 5 components from 5 distinct parts.
Other key parts include the OSMC Module Board w/pins, 24LC02BT-I/OT, COM-09032 and MCP3428x-xSL. By type, the board carries 4 ICs and 1 resistor.
It belongs with the iot & wireless and sensors designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
A modular controller that can be configure to how you want to use it
Using a modular, reconfigurable hardware architecture to create a customizable USB HID game controller.
The Open Source Modular Controller project is a fully modular and customizable gaming input system. Users can freely rearrange joysticks, buttons, and future input modules on a set of interchangeable receiver boards to build a layout that fits their gameplay style, ergonomic needs, or accessibility requirements.
Main components on the OSMC Module Joystick V2
OSMC Module Joystick V2 bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OSMC Module Board w/pins | Module standard pin large | U1 |
| 1 | 24LC02BT-I/OT | SOT-23-5_MC_MCH | U2 |
| 1 | COM-09032 | XDCR_COM-09032 | U4 |
| 1 | MCP3428x-xSL | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
OSMC Module Joystick V2 design files
The KiCad project lives in the Koalaven/Open-Source-Modular-Controller repository on GitHub; these links point at the commit this page was built from.
OSMC Module Joystick V2: common questions
How big is the OSMC Module Joystick V2?
The OSMC Module Joystick V2 measures 34 × 41 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the OSMC Module Joystick V2?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the OSMC Module Joystick V2 design files?
From the Koalaven/Open-Source-Modular-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the OSMC Module Joystick V2 design in my own project?
The repository has no license, so all rights stay with Koalaven. Use it as a reference, and ask the author before reusing the design.
More boards in Open-Source-Modular-Controller
ESP32OSMC Receiver V1.2
120.7 × 78.7 mm65 parts4LNo license0
ESP32OSMC Receiver Translators
120.1 × 78.2 mm65 parts4LNo license0
ESP32Modules
34 × 41 mm48 parts2LNo license0
OSMC Module Buttons Click
34 × 41 mm12 parts4LNo license0
OSMC Module Buttons-Nav
34 × 41 mm12 parts4LNo license0
OSMC Module Master
34 × 41 mm10 parts4LNo license0
OSMC Module Buttons
34 × 41 mm8 parts4LNo license0
OSMC Module Bumpers
34 × 41 mm5 parts4LNo license0
OSMC Module Buttons Membrane
34 × 41 mm4 parts4LNo license0
Earlier revisions in the repo: OSMC_Module_Joystick
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956