DMX-Controller
koen1711·DMX-Controller·hardware/DMX-Controller.kicad_pcb
About the DMX-Controller PCB
DMX-Controller is an open source ESP32 PCB design by koen1711, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 22 components from 15 distinct parts.
Its main chip is the ESP32_NODEMCU, from the ESP32 family. Other key parts include the C668206 and C61063. By type, the board carries 3 ICs, 3 connectors, 3 capacitors, 3 resistors, 1 switch and 1 diode.
From the project
DMX controller board based on ESP32 NodeMCU. Implementing both plain DMX and RDM while being able to read the entire DMX frame.
DMX controller board based on ESP32 NodeMCU. Implementing both plain DMX and RDM while being able to read the entire DMX frame.
We have an Theathre stage at school, we do a musical around christmas every year. We wanted to engineer boxes with LED Strips, alarms, etc. These things needed to respond with the lighting we already use, so DMX was chosen. Thus I started working on the controllers to control non traditional lights on the stage.
Main components on the DMX-Controller
DMX-Controller bill of materials (BOM)
22 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C668206 MAX3430ESA | SO08 | U1 |
| 1 | ESP32_NODEMCU | MODULE_ESP32_NODEMCU | U3 |
| 1 | C61063 XL1509-5.0E1 | 5V_BUCK | U4 |
| 1 | C309324 DMX_IN | Jack_XLR_Neutrik_NC3MAAH_Horizontal | J1 |
| 1 | C309326 DMX_OUT | Jack_XLR_Neutrik_NC3FAAH-0_Horizontal | J2 |
| 1 | C16214 DC-005 2.0 | BarrelJack_Horizontal | J3 |
| 7 | C6332200 Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | GND2, GND3, PH2, SCL1, SDA1, VCC2, VCC3 |
| 1 | C431542 POWER_EN | SW-TH_MSS22D18GX | SW1 |
| 1 | C22452 D_Schottky | D_SMA | D4 |
| 1 | 68UL 68uL | L_0805_2012Metric | L1 |
| 1 | C2836436 470u | CP_Elec_6.3x7.7 | C1 |
| 1 | C49233128 180u | CP_Elec_6.3x7.7 | C3 |
| 1 | C4747963 100u | CP_Elec_6.3x7.7 | C12 |
| 2 | C17437 680R | R_0805_2012Metric | R1, R2 |
| 1 | C17437 120R | R_0805_2012Metric | R3 |
DMX-Controller design files
The KiCad project lives in the koen1711/DMX-Controller repository on GitHub; these links point at the commit this page was built from.
DMX-Controller: common questions
What microcontroller does the DMX-Controller use?
The DMX-Controller is built around the ESP32_NODEMCU, from the ESP32 family.
How big is the DMX-Controller PCB?
The DMX-Controller measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DMX-Controller?
22 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DMX-Controller design files?
From the koen1711/DMX-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DMX-Controller design in my own project?
The repository has no license, so all rights stay with koen1711. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DMX-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k