6 open source boards using the ESP32_NODEMCU

Real designs built with the ESP32_NODEMCU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ESP32_NODEMCU

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32_NODEMCU connects to, and the resistors, capacitors and other passives placed on it.

  • The TXD pin is left unconnected on 5 of 5 designs.
  • The RXD pin is left unconnected on 5 of 5 designs.
  • The SD1 pin is left unconnected on 5 of 5 designs.
  • The SD0 pin is left unconnected on 5 of 5 designs.
GND_1pin J4_1Connected to: GND 80% · not connected 20%
TXDpin J4_4Connected to: Not connected 100%
RXDpin J4_5Connected to: Not connected 100%
GND_7pin J4_7Connected to: GND 80% · not connected 20%
G19pin J4_8Connected to: Not connected 60% · a signal 40%
G5pin J4_10Connected to: Not connected 80% · a signal 20%
G17pin J4_11Connected to: Not connected 80% · a signal 20%
G16pin J4_12Connected to: Not connected 80% · a signal 20%
G0pin J4_14Connected to: Not connected 80% · a signal 20%
G2pin J4_15Connected to: Not connected 60% · a signal 40%
G15pin J4_16Connected to: Not connected 60% · a signal 40%
SD1pin J4_17Connected to: Not connected 100%
SD0pin J4_18Connected to: Not connected 100%
CLKpin J4_19Connected to: Not connected 100%
5Vpin J5_1Connected to: 5V 60% · not connected 40%
CMDpin J5_2Connected to: Not connected 100%
SD3pin J5_3Connected to: Not connected 100%
SD2pin J5_4Connected to: Not connected 100%
GND_6pin J5_6Connected to: GND 100%
G12pin J5_7Connected to: Not connected 60% · a signal 40%
G14pin J5_8Connected to: Not connected 60% · a signal 40%
G26pin J5_10Connected to: Not connected 60% · a signal 40%
G25pin J5_11Connected to: Not connected 60% · a signal 40%
G32pin J5_13Connected to: A connector 60% · not connected 20%
  • Series resistor on 40% · 10 kΩ (2)
SNpin J5_16Connected to: Not connected 100%
SPpin J5_17Connected to: Not connected 100%
ENpin J5_18Connected to: Not connected 80% · 3.3V 20%
3V3pin J5_19Connected to: 3.3V 100%

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NixieNTPClock by bastian-bou, REST-API Meteo Station by ionutz04, Coolschematic by gryphprime and DMX-Controller by koen1711.

The ESP32_NODEMCU in open source designs

The gallery holds 6 open source boards using the ESP32_NODEMCU from 6 GitHub repositories; a typical one measures about 120.5 × 76.7 mm and carries around 20 components.

83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is NixieNTPClock by bastian-bou.

Microcontrollers on boards using the ESP32_NODEMCU

What boards using the ESP32_NODEMCU are built for

ESP32_NODEMCU: common questions

Where can I find a ESP32_NODEMCU reference design?

Each of the 6 boards on this page is a real design using the ESP32_NODEMCU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32_NODEMCU TXD pin connected?

The TXD pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32_NODEMCU.

How is the ESP32_NODEMCU RXD pin connected?

The RXD pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32_NODEMCU.

How is the ESP32_NODEMCU SD1 pin connected?

The SD1 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32_NODEMCU.

Which microcontrollers do boards using the ESP32_NODEMCU use?

Most are built on ESP32 (6).

How big is a typical board using the ESP32_NODEMCU?

The median is 120.5 × 76.7 mm, and 83% are two-layer designs.

What is the most popular open source board using the ESP32_NODEMCU?

By GitHub stars, NixieNTPClock by bastian-bou, with 3 stars.

Can I simulate one of these boards using the ESP32_NODEMCU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part