Doomguy starbie
kommaghchio·doomguy-starbie
About the Doomguy starbie PCB
Doomguy starbie is an open source ESP32 PCB design by kommaghchio, published on GitHub. It is a 2-layer board measuring 96.5 × 96 mm, with 9 components from 8 distinct parts.
Its main chip is the MOUDLE14P-SMD-2.54-21X17.8MM, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 4 connectors, 2 ICs, 2 switches and 1 resistor.
From the project
It's a starbie, but I put my own little twist on it...
This project is a modified version of Starbie, the week 1 project for the Half-Life competition. This project includes all the default features of Starbie, except this time with a rechargable battery and a joystick for additional interactivity.
It also bears the shape of a floppy disk, instead of a star, and has a different pet than the default "Sparkle".
I made this for week 1 on the Half-Life Hack Club competition, using KiCad.
Main components on the Doomguy starbie
Doomguy starbie bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | ~ | MOUDLE14P-SMD-2.54-21X17.8MM | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05_Pin | PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Doomguy starbie design files
The KiCad project lives in the kommaghchio/doomguy-starbie repository on GitHub; these links point at the commit this page was built from.
- Layoutstarbie.kicad_pcb
- Schematicstarbie.kicad_sch
- BOMBOM.csv
Doomguy starbie: common questions
What microcontroller does the Doomguy starbie use?
The Doomguy starbie is built around the MOUDLE14P-SMD-2.54-21X17.8MM, from the ESP32 family.
How big is the Doomguy starbie PCB?
The Doomguy starbie measures 96.5 × 96 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Doomguy starbie?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Doomguy starbie design files?
From the kommaghchio/doomguy-starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Doomguy starbie design in my own project?
The repository has no license, so all rights stay with kommaghchio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Doomguy starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: Starbie
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k