Correct Power Supply
About the Correct Power Supply PCB
Correct Power Supply is an open source PCB design by KonnorKinnaman, published on GitHub. It is a 2-layer board measuring 54 × 37 mm, with 26 components from 7 distinct parts.
By type, the board carries 8 resistors, 7 connectors, 3 diodes, 3 capacitors and 2 fuses.
It belongs with the power & battery designs in this gallery.
From the project
This repo contains all the schematic and PCB files for different parts of the Battery Emulator project for ECET 423
Correct Power Supply bill of materials (BOM)
26 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7 |
| 2 | Fuse | SS5H2AAPH | F1, F2 |
| 3 | RB154 | Diode_Bridge_Round_D9.0mm | REC1, REC2, REC3 |
| 3 | 1N4148WT | D_A-405_P7.62mm_Horizontal | D1, D2, D3 |
| 3 | C_Polarized | CP_Radial_D8.0mm_P5.00mm | C1, C2, C3 |
| 6 | R_US | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 2 | 0_Ohm | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7, R8 |
Correct Power Supply design files
The KiCad project lives in the KonnorKinnaman/Battery-Emulator repository on GitHub; these links point at the commit this page was built from.
Correct Power Supply: common questions
How big is the Correct Power Supply PCB?
The Correct Power Supply measures 54 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Correct Power Supply?
26 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Correct Power Supply design files?
From the KonnorKinnaman/Battery-Emulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Correct Power Supply design in my own project?
The repository has no license, so all rights stay with KonnorKinnaman. Use it as a reference, and ask the author before reusing the design.
More boards in Battery-Emulator
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k