Battery emulator design 0.1
About the Battery emulator design 0.1 PCB
Battery emulator design 0.1 is an open source PCB design by KonnorKinnaman, published on GitHub. It is a 2-layer board, with 87 components from 34 distinct parts.
Other key parts include the MAX660CPA, LM324, LM317_TO-220, LM741 and L7805. By type, the board carries 28 capacitors, 20 resistors, 14 connectors, 10 ICs, 8 jumpers and 1 fuse.
It belongs with the power & battery designs in this gallery.
From the project
This repo contains all the schematic and PCB files for different parts of the Battery Emulator project for ECET 423
Main components on the Battery emulator design 0.1
Battery emulator design 0.1 bill of materials (BOM)
87 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX660CPA | DIP-8_W7.62mm_LongPads | IC1 |
| 1 | LM324 | DIP-8_W7.62mm_LongPads | U1 |
| 4 | LM317_TO-220 | TO-220-3_Vertical | U2, U4, U6, U8 |
| 3 | LM741 | DIP-8_W7.62mm_LongPads | U3, U5, U7 |
| 1 | L7805 | TO-220-3_Vertical | U9 |
| 1 | ExtPwrGnd | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | Barrel_Jack | BarrelJack_Horizontal | J5 |
| 1 | ExtSet1 | PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | ExtSet2 | PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | ExtSet3 | PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | ExtSet4 | PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | ExtSetAll | PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | GND_CLIP | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | V_Out1 | PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | ExtPwr | PinHeader_1x01_P2.54mm_Vertical | J13 |
| 1 | GND | PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | V_Out2 | PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | V_Out3 | PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | V_Out4 | PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | 1A | FUSE_RST-1-BULK | F1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole_4.3mm_M4_Pad | H1, H2, H3, H4 |
| 5 | Jumper_3_Bridged12 | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5 |
| 1 | SetPot | PinHeader_1x02_P2.54mm_Vertical | JP6 |
| 1 | Preset1 | PinHeader_1x02_P2.54mm_Vertical | JP7 |
| 1 | Preset2 | PinHeader_1x02_P2.54mm_Vertical | JP8 |
| 1 | 10k | Potentiometer_Bourns_3386C_Horizontal | RV1 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 19 | 100nF | C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C4, C12, C15, C16, C17 +11 |
| 8 | 100uF | CP_Radial_D7.5mm_P2.50mm | C5, C6, C7, C8, C9, C10, C11, C14 |
| 1 | 220uF | CP_Radial_D10.0mm_P5.00mm | C13 |
| 1 | 820R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 12 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7, R8, R9, R11, R12, R13, R14 +4 |
| 3 | 120R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R15, R20 |
| 4 | R_US | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R22, R23, R24 |
Battery emulator design 0.1 design files
The KiCad project lives in the KonnorKinnaman/Battery-Emulator repository on GitHub; these links point at the commit this page was built from.
Battery emulator design 0.1: common questions
How big is the Battery emulator design 0.1 PCB?
The Battery emulator design 0.1 has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery emulator design 0.1?
87 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Battery emulator design 0.1 design files?
From the KonnorKinnaman/Battery-Emulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Battery emulator design 0.1 design in my own project?
The repository has no license, so all rights stay with KonnorKinnaman. Use it as a reference, and ask the author before reusing the design.
More boards in Battery-Emulator
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k