Kmswitch b

KooroshTorabi·KMSwitch·hardware/variant-b-rp2040/kmswitch-b.kicad_pcb

Kmswitch b PCB layout, top view — open source RP2040/RP2350 board by KooroshTorabi

About the Kmswitch b PCB

Kmswitch b is an open source RP2040/RP2350 PCB design by KooroshTorabi, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 80 × 54 mm, with 89 components from 30 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the CA-IS3721HS, C131024 and AP2112K-3.3. By type, the board carries 38 capacitors, 27 resistors, 7 ICs, 6 connectors, 4 switches and 4 diodes.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Open-hardware keyboard/mouse switch for two computers, built on RP2040. Switch with Win+F12 or by moving the mouse past the screen edge. Works in BIOS, no host software. One USB-A port for any keyboard or dongle, microSD shared drive. KiCad boards (RP2040-Zero or bare RP2040) + 3D-printable OpenSCAD case.

One keyboard and mouse for two computers. A small open-hardware box that sits between your USB keyboard/mouse (or a wireless dongle, or a hub) and two PCs. Switch with a hotkey, or just push the mouse off the edge of one screen and it appears on the other. No software on either PC, works in the BIOS, and the two PCs stay galvanically isolated.

- MCU-A reads your input devices as a USB host. It sends each report either to PC 1 directly or over the isolated UART to MCU-B, which sends it to PC 2. - To each PC, its MCU looks like a plain USB keyboard + mouse (Boot Protocol), so it works in…

Kmswitch b, from the project README
From the project README

Main components on the Kmswitch b

Kmswitch b bill of materials (BOM)

89 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CA-IS3721HS
U3
2
RP2040
U10, U50
2
C131024
W25Q16JVSSIQ (2 MB)
U11, U51
2
AP2112K-3.3
U12, U52
2
12MHZ
12MHz
Y10, Y50
1
C165948
USB-C 5V IN
J1
1
n/a
USB-A host (hub/keyboard)
J2
1
104031-0811
J3
1
C165948
USB-C to PC 1
J4
1
C165948
USB-C to PC 2
J5
1
n/a
RGB LED (WS2812): 5V DIN GND
J6
1
C545213
2A hold (1812)
F1
2
C116501
BOOTSEL
SW31, SW71
2
C116501
RESET
SW33, SW73
2
SS34
D2, D3
2
C12624
green
D37, D77
1
C294520
100uF 10V
C1
1
100NF
100nF
C2
23
100NF
100nF
C3, C4, C6, C14, C15, C16, C17, C18 +15
5
10UF
10uF
C5, C26, C27, C66, C67
Show 10 more
QtyPartRefs
4
15PF
15pF
C11, C12, C51, C52
4
1UF
1uF
C22, C23, C62, C63
2
5.1K
5.1k
R1, R2
2
22R
R3, R4
7
10K
10k
R5, R6, R7, R8, R32, R42, R72
1
330R
R9
6
1k
R13, R30, R38, R53, R70, R78
4
27R
R28, R29, R68, R69
4
5.1K
5.1k
R40, R41, R44, R45
1
20K
20k
R43

Kmswitch b design files

The KiCad project lives in the KooroshTorabi/KMSwitch repository on GitHub; these links point at the commit this page was built from.

Kmswitch b: common questions

What microcontroller does the Kmswitch b use?

The Kmswitch b is built around the RP2040, from the RP2040/RP2350 family.

How big is the Kmswitch b PCB?

The Kmswitch b measures 80 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kmswitch b?

89 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kmswitch b design files?

From the KooroshTorabi/KMSwitch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kmswitch b design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which KooroshTorabi chose for the repository.

Can I test firmware for the Kmswitch b without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in KMSwitch

Similar boards